ATI 3D Beschleunigung

bueno · 23.02.2006

Hallo,
Ich weiß dieses Thema wurde hier schon oft besprochen, habe mir auch jeden Thread dazu durchgelesen und suche bereits in google seit langem nach einer Lösung, aber ich schaffe es einfach nicht.
Ich sehe zwar immer Anleitungen wo die Leute schreiben, dass sie es so geschafft haben, aber bei mir funktioniert das irgendwie nicht...entweder weil die älteren treiber besser waren oder es nur auf den älteren ATI Karten richtig funktioniert. Ich weiß es nicht.

Habe eine X700 mit 256MB in meinem Laptop stecken, könnte jemand der es bereits auf einer neueren ATI Karte geschafft hat hier eine kleine Anleitung schreiben? wäre echt nett, bin noch neu in Linux...und verwende Debian =)

DennisM · 23.02.2006

Wo hackt es denn? Wie soll man dir helfen ohne Informationen.

MFG

Dennis

bueno · 23.02.2006

Also, ich habe die neuesten fglrx treiber ausgeführt...aber es klappt nicht. wenn ich glxgears mache oder glxinfo | grep "rendering" oder so ähnlich dann sehe ich auch, das sich noch keine 3D beschleunigung habe.

In meiner xorg.conf habe ich bei dem Modulen "dri" und "glx" geladen.
und in der Section "Device" habe ich als Driver "fglrx" angegeben (nach dem installieren von den Treibern natürlich, vorher stand da "ati")

devilz · 23.02.2006

Was wirft denn fglrxinfo aus ?

rikola · 23.02.2006

Welche Version hast Du? welchen Kernel dazu? fglrx 8.21.7 laeuft gut mit 2.6.15.x, aber < 8.21.7 gab es probleme, selbst mit den Patches.
sende mal die ausgabe von
dmesg | grep fglrx,
schau Dir an, was in Xorg.0.log darueber steht.
Vielleicht sind module geladen, die fglrx im Wege stehen.
Version von Kernel und Treiber sind bei solchen Fragen immer sehr nuetzlich.

bueno · 23.02.2006

Also, ich habe den 2.6.15er Kernel und fglrx 8.21.7 (das fglrx 8.22.5 hätte ich auch zur Verfügung)

Ich habe mir jetzt mal das fglrx 8.21.7 ausgeführt per "./" da es eine *.run datei war.

Danach ist gestanden, das Fehler während der Installation geschehen sind und in der Datei fglrx-installation.log drinnenstehen. Danach wollte ich fglrxconfig machen, aber dieser Befehl hat nicht mehr funktioniert. Soweit ich weiß muss man jetzt aticonfig verwenden. Ich habe zuerst "aticonfig --initial" eingegeben und danach "aticonfig -f".

Was mir danach aufgefallen ist: In "xorg.conf" gibt es jetzt zweimal die Section "Monitor", zweimal die Section "Device" und zweimal die Section "Screen", einmal die, die vorher da waren und dann nochmal die neuen die bei der aticonfig anscheinend hinzugefügt wurden. Macht das was? Sollte ich das so lassen oder die alten rauslöschen?

Hier einmal die die fglrx-installation.log:

Code:

[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Error] Kernel Module : No kernel module build environment - please consult readme.

Das ist die Ausgabe von dmesg | grep fglrx:
...gibt nichts aus

Folgendes liefert fglrxinfo:

Code:

display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)

Das steht in der Xorg.0.log:

Code:

X Window System Version 6.9.0 (Debian 6.9.0.dfsg.1-4 20060114230205 David Nusinow <dnusinow@debian.org>)
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: Linux 2.6.15-1-686 i686 [ELF] 
Current Operating System: Linux DEBIAN 2.6.15-1-686 #1 Tue Feb 21 20:25:22 UTC 2006 i686
Build Date: 14 January 2006
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.15-1-686 (Debian 2.6.15-7) (waldi@debian.org) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #1 Tue Feb 21 20:25:22 UTC 2006 
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 25 00:24:19 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig Screen 0" (0)
(**) |   |-->Monitor "aticonfig Monitor 0"
(**) |   |-->Device "ATI Graphics Adapter 0"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(**) Option "XkbOptions" "nodeadkeys"
(**) XKB: options: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open ACPI failed (/proc/acpi/event) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.8
	X.Org XInput driver : 0.5
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1025,0066 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2664 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1025,0066 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1025,0066 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1025,0066 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 1025,0066 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 1025,0066 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 1025,0066 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1025,0066 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1025,0066 rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5653 card 1025,0066 rev 00 class 03,00,00 hdr 00
(II) PCI: 06:01:0: chip 104c,8031 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:01:2: chip 104c,8032 card 1025,0066 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:01:3: chip 104c,8033 card 1025,0066 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:03:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:08:0: chip 14e4,169c card 1025,0066 rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[1] -1	0	0x00003400 - 0x000034ff (0x100) IX[B]
	[2] -1	0	0x00003800 - 0x000038ff (0x100) IX[B]
	[3] -1	0	0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xb0100000 - 0xb01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 9: bridge is at (0:28:0), (0,9,9), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:28:1), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:2), (0,2,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,7), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
	[0] -1	0	0x00004000 - 0x000040ff (0x100) IX[B]
	[1] -1	0	0x00004400 - 0x000044ff (0x100) IX[B]
	[2] -1	0	0x00004800 - 0x000048ff (0x100) IX[B]
	[3] -1	0	0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
	[0] -1	0	0xb0200000 - 0xb02fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
	[0] -1	0	0x50000000 - 0x51ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:1:0), (6,7,8), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
	[0] -1	0	0x00004000 - 0x000040ff (0x100) IX[B]
	[1] -1	0	0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 7 prefetchable memory range:
	[0] -1	0	0x50000000 - 0x51ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xc0000000/28, 0xb0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xb0200000 - 0xb020ffff (0x10000) MX[B]
	[1] -1	0	0xb0218000 - 0xb0218fff (0x1000) MX[B]
	[2] -1	0	0xb0214000 - 0xb0215fff (0x2000) MX[B]
	[3] -1	0	0xb0210000 - 0xb0213fff (0x4000) MX[B]
	[4] -1	0	0xb0217000 - 0xb02177ff (0x800) MX[B]
	[5] -1	0	0xb0000400 - 0xb00004ff (0x100) MX[B]
	[6] -1	0	0xb0000800 - 0xb00009ff (0x200) MX[B]
	[7] -1	0	0xb0000000 - 0xb00003ff (0x400) MX[B]
	[8] -1	0	0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
	[9] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[10] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[11] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[12] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[13] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[14] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[15] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[16] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[17] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[18] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[19] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[20] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xb0200000 - 0xb020ffff (0x10000) MX[B]
	[1] -1	0	0xb0218000 - 0xb0218fff (0x1000) MX[B]
	[2] -1	0	0xb0214000 - 0xb0215fff (0x2000) MX[B]
	[3] -1	0	0xb0210000 - 0xb0213fff (0x4000) MX[B]
	[4] -1	0	0xb0217000 - 0xb02177ff (0x800) MX[B]
	[5] -1	0	0xb0000400 - 0xb00004ff (0x100) MX[B]
	[6] -1	0	0xb0000800 - 0xb00009ff (0x200) MX[B]
	[7] -1	0	0xb0000000 - 0xb00003ff (0x400) MX[B]
	[8] -1	0	0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
	[9] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[10] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[11] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[12] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[13] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[14] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[15] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[16] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[17] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[18] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[19] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[20] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xb0200000 - 0xb020ffff (0x10000) MX[B]
	[6] -1	0	0xb0218000 - 0xb0218fff (0x1000) MX[B]
	[7] -1	0	0xb0214000 - 0xb0215fff (0x2000) MX[B]
	[8] -1	0	0xb0210000 - 0xb0213fff (0x4000) MX[B]
	[9] -1	0	0xb0217000 - 0xb02177ff (0x800) MX[B]
	[10] -1	0	0xb0000400 - 0xb00004ff (0x100) MX[B]
	[11] -1	0	0xb0000800 - 0xb00009ff (0x200) MX[B]
	[12] -1	0	0xb0000000 - 0xb00003ff (0x400) MX[B]
	[13] -1	0	0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[18] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[21] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[23] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[24] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[25] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[26] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[27] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "evdev"
(II) Loading /usr/X11R6/lib/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 0.0.0, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.9.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.99.8, module version = 8.21.7
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.5
(II) ATI Radeon/FireGL: The following chipsets are supported:
	RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
	MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
	RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
	RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
	MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
	FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
	RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
	RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
	RADEON 9600 PRO (RV360 4152),
	MOBILITY RADEON 9600/9700 (M10/M11 4E50),
	MOBILITY RADEON 9550 (M12 4E56), RADEON 9500 (R300 4144),
	RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
	RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
	RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
	RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
	FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
	RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
	FireGL X2-256/X2-256t (R350 4E4B),
	MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
	RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
	FireGL V3100 (RV370 5B64), MOBILITY RADEON X300 (M22 5460),
	MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464),
	RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
	MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
	MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
	RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
	RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
	FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
	RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
	RADEON X800 PRO (R423 5549),
	RADEON X800 XT Platinum Edition (R423 554A),
	RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
	FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
	MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
	RADEON X800 XL (R430 554D), RADEON X800 (R430 554F),
	RADEON X850 XT Platinum Edition (R480 5D4D),
	RADEON X850 PRO (R480 5D4F), RADEON X850 XT (R480 5D52),
	MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
	FireGL V5000 (RV410 5E48), RADEON X700 XT (RV410 5E4A),
	RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C),
	RADEON X700 (RV410 5E4D), RADEON X700 (RV410 5E4F),
	MOBILITY RADEON X700 (M26 5652), MOBILITY RADEON X700 (M26 5653),
	MOBILITY RADEON X700 XL, RADEON 9100 IGP (RS300 5834),
	RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
	MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
	RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
	RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
	RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
	RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.21.7
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.21g1                           
(II) ATI Proprietary Linux Driver Build Date: Jan 14 2006 16:26:42
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.21.1-driver-lnx-238868
(--) Chipset MOBILITY RADEON X700 (M26 5653) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xb0200000 - 0xb020ffff (0x10000) MX[B]
	[6] -1	0	0xb0218000 - 0xb0218fff (0x1000) MX[B]
	[7] -1	0	0xb0214000 - 0xb0215fff (0x2000) MX[B]
	[8] -1	0	0xb0210000 - 0xb0213fff (0x4000) MX[B]
	[9] -1	0	0xb0217000 - 0xb02177ff (0x800) MX[B]
	[10] -1	0	0xb0000400 - 0xb00004ff (0x100) MX[B]
	[11] -1	0	0xb0000800 - 0xb00009ff (0x200) MX[B]
	[12] -1	0	0xb0000000 - 0xb00003ff (0x400) MX[B]
	[13] -1	0	0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[18] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[21] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[23] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[24] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[25] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[26] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[27] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8227640
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xb0200000 - 0xb020ffff (0x10000) MX[B]
	[6] -1	0	0xb0218000 - 0xb0218fff (0x1000) MX[B]
	[7] -1	0	0xb0214000 - 0xb0215fff (0x2000) MX[B]
	[8] -1	0	0xb0210000 - 0xb0213fff (0x4000) MX[B]
	[9] -1	0	0xb0217000 - 0xb02177ff (0x800) MX[B]
	[10] -1	0	0xb0000400 - 0xb00004ff (0x100) MX[B]
	[11] -1	0	0xb0000800 - 0xb00009ff (0x200) MX[B]
	[12] -1	0	0xb0000000 - 0xb00003ff (0x400) MX[B]
	[13] -1	0	0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[21] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[22] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[23] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[24] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[25] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[26] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[27] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[28] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[29] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[30] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[31] 0	0	0xb01203b0 - 0xb01203bb (0xc) IS[B]
	[32] 0	0	0xb01203c0 - 0xb01203df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY RADEON X700 (M26 5653)" (Chipset = 0x5653)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0066)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xb0100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.10
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2003, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: M26-P
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/X11R6/lib/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.so
(II) fglrx(0): Connected Display1: LCD on internal LVDS
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LPL  Model: 0  Serial#: 0
(II) fglrx(0): Year: 2004  Week: 0
(II) fglrx(0): EDID Version: 1.2
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) fglrx(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 71.2 MHz   Image Size:  289 x 21 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(II) fglrx(0):  LGPhilipsLCD
(II) fglrx(0):  LP154W01-A5K2
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3.  3 power states available:
(II) fglrx(0):   1. 358/344MHz @ 60Hz [enable load balancing]
(II) fglrx(0):   2. 105/120MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0):   3. 209/182MHz @ 60Hz [low voltage, enable sleep]
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 9 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"   71.25  1280 1328 1360 1440  800 802 808 823
(**) fglrx(0): *Mode "1024x768": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   71.25  1024 1072 1104 1440  768 802 808 823
(**) fglrx(0): *Mode "800x600": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   71.25  800 848 880 1440  600 802 808 823
(**) fglrx(0): *Mode "640x480": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   71.25  640 688 720 1440  480 802 808 823
(**) fglrx(0):  Default mode "640x400": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   71.25  640 688 720 1440  400 802 808 823
(**) fglrx(0):  Default mode "512x384": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   71.25  512 560 592 1440  384 802 808 823
(**) fglrx(0):  Default mode "400x300": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   71.25  400 448 480 1440  600 802 808 823
(**) fglrx(0):  Default mode "320x240": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   71.25  320 368 400 1440  480 802 808 823
(**) fglrx(0):  Default mode "320x200": 71.2 MHz (scaled from 0.0 MHz), 49.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   71.25  320 368 400 1440  400 802 808 823
(++) fglrx(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.8
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.8
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 6.8.99.8, module version = 8.21.7
	ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): cpuSpeedMHz: 0x000007cb
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xb0100000 - 0xb010ffff (0x10000) MX[B]
	[1] 0	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xb0200000 - 0xb020ffff (0x10000) MX[B]
	[8] -1	0	0xb0218000 - 0xb0218fff (0x1000) MX[B]
	[9] -1	0	0xb0214000 - 0xb0215fff (0x2000) MX[B]
	[10] -1	0	0xb0210000 - 0xb0213fff (0x4000) MX[B]
	[11] -1	0	0xb0217000 - 0xb02177ff (0x800) MX[B]
	[12] -1	0	0xb0000400 - 0xb00004ff (0x100) MX[B]
	[13] -1	0	0xb0000800 - 0xb00009ff (0x200) MX[B]
	[14] -1	0	0xb0000000 - 0xb00003ff (0x400) MX[B]
	[15] -1	0	0xb0100000 - 0xb010ffff (0x10000) MX[B](B)
	[16] -1	0	0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] 0	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[23] -1	0	0x000020a0 - 0x000020bf (0x20) IX[B]
	[24] -1	0	0x000018c0 - 0x000018cf (0x10) IX[B]
	[25] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[26] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[27] -1	0	0x00001880 - 0x000018bf (0x40) IX[B]
	[28] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[29] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[30] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[31] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[32] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[33] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[34] 0	0	0xb01203b0 - 0xb01203bb (0xc) IS[B]
	[35] 0	0	0xb01203c0 - 0xb01203df (0x20) IS[B]
(II) fglrx(0): UMM Bus area:     0xc05e9000 (size=0x07a07000)
(II) fglrx(0): UMM area:     0xc05e9000 (size=0x07a07000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x07ff0000
(II) fglrx(0): Splitting WC range: base: 0xc0000000, size: 0x7ff0000
(II) fglrx(0): Splitting WC range: base: 0xc4000000, size: 0x3ff0000
(II) fglrx(0): Splitting WC range: base: 0xc6000000, size: 0x1ff0000
(II) fglrx(0): Splitting WC range: base: 0xc7000000, size: 0xff0000
(II) fglrx(0): Splitting WC range: base: 0xc7800000, size: 0x7f0000
(II) fglrx(0): Splitting WC range: base: 0xc7c00000, size: 0x3f0000
(II) fglrx(0): Splitting WC range: base: 0xc7e00000, size: 0x1f0000
(II) fglrx(0): Splitting WC range: base: 0xc7f00000, size: 0xf0000
(II) fglrx(0): Splitting WC range: base: 0xc7f80000, size: 0x70000
(II) fglrx(0): Splitting WC range: base: 0xc7fc0000, size: 0x30000
(==) fglrx(0): Write-combining range (0xc7fe0000,0x10000)
(==) fglrx(0): Write-combining range (0xc7fc0000,0x30000)
(==) fglrx(0): Write-combining range (0xc7f80000,0x70000)
(==) fglrx(0): Write-combining range (0xc7f00000,0xf0000)
(==) fglrx(0): Write-combining range (0xc7e00000,0x1f0000)
(==) fglrx(0): Write-combining range (0xc7c00000,0x3f0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc7800000,0x7f0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc7000000,0xff0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc6000000,0x1ff0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc4000000,0x3ff0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc0000000,0x7ff0000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 800)
(II) fglrx(0): Largest offscreen area available: 1280 x 7387
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Generic Keyboard: XkbVariant: "nodeadkeys"
(**) Option "XkbOptions" "nodeadkeys"
(**) Generic Keyboard: XkbOptions: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/psaux"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "false"
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0

Ich hoffe ihr könnt mir helfen.

theton · 24.02.2006

Nun, dass du keine 3D-Beschleunigung hast, liegt also daran, dass er das Kernel-Modul nicht laden kann, was ja bei den Fehlern, die du beim Installieren des Moduls bekommst kein Wunder ist.

Wenn ich die Meldung des Installers richtig interpretiere, braucht er lediglich Kernel-Sources, die die gleiche Konfiguration haben, wie dein installierter Kernel. Installiere dir also mit

Code:

apt-get install kernel-source-2.6.16

die Kernel-Sources zu deiner Kernel-Version. Danach findest du in /usr/src einen Tarball, den du mit

Code:

tar -xjf kernel-source-2.6.16.tar.bz2

entpacken kannst. Verlinke das entstandene Verzeichnis nach /usr/src/linux

Code:

ln -s /usr/src/kernel-source-2.6.16 /usr/src/linux

und kopiere deine Kernel-Konfiguration mit

Code:

cp /boot/config-`uname -r` /usr/src/linux/.config

Dann wechsel nach /usr/src/linux und fuehre dort

Code:

make oldconfig && make all

aus. Wenn das make durchgelaufen ist, versuche nochmal den Installer auszufuehren.

Siehe auch http://linuxger.ircland.de/index.php/Kernel_Module_Build_Environment_unter_Debian_einrichten oder auch http://wiki.blhg.org/index.php/Kernel_Module_Build_Environment_unter_Debian_einrichten

avaurus · 24.02.2006

eh, der 2.6.16 ist noch garnicht erschienen, lediglich als release candidate :>.

theton · 24.02.2006

Hmm stimmt, also wahrscheinlich nen "hand-installierter" Kernel. Dann hat da wohl jemand seine Kernel-Sources geloescht. Wie auch immer. Das (die?) Build-Environment baut man sonst ja auch aehnlich auf, nur dass man nicht die Sources des Debian-Pakets nehmen kann. Hatte ich garnicht drauf geachtet.

bueno · 24.02.2006

Oh, Sorry....habe den 2.6.15er Kernel...sorry habe mich oben verschreiben!
Soll ich jetzt die Kernelsources für den 2.6.15er auch laden so wie oben beschrieben (nur eben die Versionsnummer auf 2.6.15 wechseln)?
Oder liegt der Fehler doch an etwas anderem?

DennisM · 24.02.2006

Soll ich jetzt die Kernelsources für den 2.6.15er auch laden so wie oben beschrieben (nur eben die Versionsnummer auf 2.6.15 wechseln)?

Ja. Evtl. noch einige devel Tools wie gcc installieren.

MFG

Dennis

bueno · 24.02.2006

Mh....bin gerade aus der Schule Heim gekommen. Habe probiert den Kernelsource zu installieren mit dem Befehl:

Code:

apt-get install kernel-source-2.6.15

...aber es klappt nicht, der findet nichts. Habe auch schon mit apt-cache search gesucht...aber nichts gefunden. Habe auch schon ein apt-get update gemacht.

--> hat sich erledigt, bin nun draufgekommen, dass es linux-source-2.6.15 heißt

Aber jetzt funktioniert folgender Befehl leider nicht:

Code:

cp /boot/config-`uname -r` /usr/src/linux/.config

er sagt mir, dass es kein Verzeichnis ist...

theton · 25.02.2006

Dann hast du die Quelltexte nicht richtig entpackt oder verlinkt. *vermut*
Tarball auspacken und dann

ln -s /usr/src/kernel-source-2.6.16 /usr/src/linux

*wiederhol* :|

DennisM · 25.02.2006

cp /boot/config-`uname -r` /usr/src/linux/.config

Du müsstest /usr/src/linux-2.6.15 noch nach /usr/src/linux linken.

MFG

Dennis

bueno · 25.02.2006

So...ich habs nochmal gemacht und es hat geklappt. Für das make habe ich unter anderem noch gcc und glibc gebraucht...hab ich mir auch per apt gehohlt und jetzt läuft das make gerade durch...

Habe nun nachdem make durchgelaufen ist den Treiber-Installer erneut ausgeführt. Es kamen die selben fehler während der Installation die ich oben bereits gepostet habe (fglrx-installation.log)

Die 3D Beschleunigung funktioniert leider nochimmer nicht

theton · 25.02.2006

Da bin ich ueberfragt. Beim Kompilieren zu Helfen war ja kein Ding (gibt ja bei fast allen LKMs die gleichen Probleme

), aber da ich keine ATI habe, fehlen mir auch die entsprechenden Erfahrungen mit den Treibern.

Goodspeed · 25.02.2006

Wenn Du wirklich alle Threads gelesen hast, solltest Du eigentlich auch über den Link gestolpert sein -> Link

Mach's doch einfach so, wie es da beschrieben ist ... und erzähl mir ja nicht "Geht nicht!" ...

bueno · 25.02.2006

Goodspeed1978 schrieb:
Wenn Du wirklich alle Threads gelesen hast, solltest Du eigentlich auch über den Link gestolpert sein -> Link

Mach's doch einfach so, wie es da beschrieben ist ... und erzähl mir ja nicht "Geht nicht!" ...

Ok, danke für den Link, den muss ich wohl übersehen haben...es gibt ja auch sau viele Threads über die ATI Treiber. Das HowTo ist zwar etwas lang aber ich werd mich mal hinsetzen und es durchziehen.

ATI 3D Beschleunigung

bueno

Eroberer

DennisM

Moderator u. Newsposter

bueno

Eroberer

devilz

Pro*phet

rikola

Foren Gott

bueno

Eroberer

theton

Bitmuncher

avaurus

°°°°°°°°°°°°°

theton

Bitmuncher

bueno

Eroberer

DennisM

Moderator u. Newsposter

bueno

Eroberer

theton

Bitmuncher

DennisM

Moderator u. Newsposter

bueno

Eroberer

theton

Bitmuncher

Goodspeed

Foren Gott

bueno

Eroberer

Ähnliche Themen

Langsam geworden: Firefox (Mint 17.1)

Bestehende physische Windows Maschine Virtualisieren II

Linux Mint 10 und ATI

ATI 3D-Beschleunigung funktioniert nicht

Ubuntu 8.04 64 bit ati grafikkarten problem

Neueste Beiträge

Neueste Themen