DVB-T Gentoo

[DennisM]

Hast du überhaupt versucht die Karte mit YaST zu installieren?
Scheint mir jedenfalls nicht so.

MFG

Dennis

 

[devilz]

Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.12 loaded

Aber der Treiber wird wohl geladen ?

Mach mal bitte ein "lsmod | grep dvb" und ein "lsmod | grep saa7" und poste das hier ...

Installier mal von den CDs/DVD xawtv und mach mal "xawtv -hwscan" und poste das auch hier ...

 

[Sierra2256]

saa7130/34: v4l2 driver version 0.2.12 loaded

das hängt wohl damit zusammen das ich den tv-karten treiber von ner anderen karten installiert hat... "probeversuche"... aber meine karte benutzt sowieso den saa7146 und nich saa713x....

dann hier noch ma "gecleantes" system ohne falsche Treiber

Linux version 2.6.11.4-20a-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Wed Mar 23 21:52:37 UTC 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
 BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
 BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196592
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 192496 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694                                ) @ 0x000f7550
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: local apic disabled
Allocating PCI resources starting at 30000000 (gap: 30000000:cfff0000)
Built 1 zonelists
Kernel command line: root=/dev/hda7 vga=0x317 selinux=0  splash=silent resume=/dev/hda6
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1671.292 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 774324k/786368k available (1865k kernel code, 11456k reserved, 659k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3309.56 BogoMIPS (lpj=1654784)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1333k freed
ACPI: Looking for DSDT in initrd... not found!
 not found!
ACPI: setting ELCR to 0200 (from 0e20)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1125613148.680:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe4000000, mapped to 0xf0880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e7e0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 57135 bytes,<6>...found (1024x768, 36789 bytes, v3).
Console: switching to colour frame buffer device 127x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
spurious 8259A interrupt: IRQ7.
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
PM: Checking swsusp image.
PM: Resume from disk failed.
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 USB2 UAR1 LPT1
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 204k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L080AVVA07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive
hdd: CD-RW CRX100E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 >
hdc: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache, DMA
Attempting manual resume
PM: Checking swsusp image.
swsusp: Suspend partition has wrong signature?
PM: Resume from disk failed.
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 385520k swap on /dev/hda6.  Priority:42 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
SCSI subsystem initialized
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
gameport: C-Media Gameport is pci0000:00:0a.0/gameport0, io 0x201, speed 1864kHz
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
Capability LSM initialized
ieee1394: Initialized config rom entry `ip1394'
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
NET: Registered protocol family 23
via_ircc: unsupported module, tainting kernel.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
load_module: err 0xffffffef (dont worry)
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: AGP aperture is 64M @ 0xe0000000
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: irq 11, io base 0xdc00
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.3: UHCI Host Controller
uhci_hcd 0000:00:11.3: irq 11, io base 0xe000
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
load_module: err 0xffffffef (dont worry)
ALSA sound/core/init.c:103: cannot find the slot for index 0 (range 0-0)
VIA 82xx Audio: probe of 0000:00:11.5 failed with error -12
e100: Intel(R) PRO/100 Network Driver, 3.4.1-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0xef100000, irq 10, MAC addr 00:90:27:2E:C4:CF
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-2: new low speed USB device using uhci_hcd and address 3
usb 2-2: new full speed USB device using uhci_hcd and address 2
st: Version 20041025, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
usb 2-2: device descriptor read/all, error -110
usb 2-2: new full speed USB device using uhci_hcd and address 3
cdrom: open failed.
usb 2-2: device descriptor read/all, error -110
usb 2-2: new full speed USB device using uhci_hcd and address 4
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
usb 2-2: device descriptor read/8, error -110
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
ACPI: Fan [FAN] (on)
NET: Registered protocol family 10
Disabled Privacy Extensions on device c033d600(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device ed98dc00(sit0)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: Thermal Zone [THRM] (69 C)
powernow-k8: Processor cpuid 662 not supported
usb 2-2: device descriptor read/8, error -110
usb 2-2: new full speed USB device using uhci_hcd and address 5
usb 2-2: device descriptor read/8, error -110
eth0: no IPv6 routers present
usb 2-2: device descriptor read/8, error -110
usbcore: registered new driver hiddev
usbcore: registered new driver usbserial_generic
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-1
input: USB HID v1.00 Gamepad [Microsoft SideWinder Game Pad Pro USB version 1.0] on usb-0000:00:11.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
subfs 0.9

lsmod | grep dvb

dvb_pll                 3844  1 cx22702
dvb_ttpci              86792  0
saa7146_vv             45696  1 dvb_ttpci
saa7146                17828  2 dvb_ttpci,saa7146_vv
ves1820                 5764  1 dvb_ttpci
stv0299                 9732  1 dvb_ttpci
tda8083                 5892  1 dvb_ttpci
stv0297                 8320  1 dvb_ttpci
sp8870                  7052  1 dvb_ttpci
firmware_class          9472  4 sp887x,nxt2002,dvb_ttpci,sp8870
ves1x93                 6660  1 dvb_ttpci
ttpci_eeprom            2688  1 dvb_ttpci
i2c_core               21776  22 tda80xx,tda1004x,tda10021,sp887x,nxt6000,nxt2002,mt352,mt312,l64781,dib3000_common,cx24110,cx22702,cx22700,at76c651,dvb_ttpci,ves1820,stv0299,tda8083,stv0297,sp8870,ves1x93,ttpci_eeprom
dvb_core               77608  1 dvb_ttpci

lsmod | grep saa7

saa7146_vv             45696  1 dvb_ttpci
video_buf              20356  1 saa7146_vv
saa7146                17828  2 dvb_ttpci,saa7146_vv
v4l1_compat            12804  1 saa7146_vv
v4l2_common             5760  1 saa7146_vv
videodev                9088  1 saa7146_vv

und @ dennis... Ja ich habe probiert die Karten über YaST zu installieren... YaST hat die nicht erkannt und findet sie nicht als TV-Karte

 

[Sierra2256]

YEAHHHHHH....

ES LÄUFT!!!!

oh man .... ich komm mir gerade mal ein bisschen blöd vor^^
argh peinlich

ein einizges "modprobe budget-av" hat gereicht....

schon lief die karte bei kaxtv

trotzdem großen großen Danke für eure hilfe

muss nur noch hinbekommen das ich nicht jedes ma modprobe budget-av eingeben muss ^^

 

[golobay]

Terratec cinergy 1200 und SuSE 9.3

habe die karte als bttv-karte mit standard-Tuner(erkannt) per YaST eingebunden.

Module budget-av und stv0299 sind geladen.

das sollte den Reboot überstehen