externe Festplatte wird nach neustart nicht mehr "erkannt"

pyropeter

pyropeter

..geht mit foo in die bar
[gelöst] externe Festplatte wird nach neustart nicht mehr "erkannt"

Ich habe heute meinen PC neu gestartet. Danach ergab ein anstöpseln meiner externen festplatte nur noch ein müdes

Code:
[B]Oct 14 16:50:41 eddie kernel: usb 1-1: new high speed USB device using ehci_hcd and address 5[/B]
Oct 14 16:50:41 eddie kernel: usb 1-1: configuration #1 chosen from 1 choice
[B]Oct 14 16:50:41 eddie kernel: scsi10 : SCSI emulation for USB Mass Storage devices[/B]
Oct 14 16:50:46 eddie kernel: scsi 10:0:0:0: Direct-Access     TrekStor  DataStation 8        PQ: 0 ANSI: 2 CCS
Oct 14 16:50:46 eddie kernel: sd 10:0:0:0: Attached scsi generic sg2 type 0
Oct 14 16:50:46 eddie kernel: sd 10:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Oct 14 16:50:46 eddie kernel: sd 10:0:0:0: [sdb] Write Protect is off
[B]Oct 14 16:50:46 eddie kernel: sdb: sdb1 sdb2[/B]
[B]Oct 14 16:50:46 eddie kernel: sd 10:0:0:0: [sdb] Attached SCSI disk[/B]
[B]Oct 14 16:50:54 eddie kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 5
Oct 14 16:50:54 eddie kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 5
Oct 14 16:50:55 eddie kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 5
Oct 14 16:50:55 eddie kernel: usb 1-1: reset high speed USB device using ehci_hcd and address 5
Oct 14 16:50:56 eddie kernel: usb 1-1: USB disconnect, address 5
Oct 14 16:50:56 eddie kernel: sd 10:0:0:0: Device offlined - not ready after error recovery[/B]
Oct 14 16:50:56 eddie kernel: usb 1-1: new high speed USB device using ehci_hcd and address 6
Oct 14 16:50:56 eddie kernel: usb 1-1: new high speed USB device using ehci_hcd and address 7
Oct 14 16:50:57 eddie kernel: usb 1-1: new high speed USB device using ehci_hcd and address 8
Oct 14 16:50:58 eddie kernel: usb 1-1: new high speed USB device using ehci_hcd and address 9
Oct 14 16:50:58 eddie kernel: usb 2-1: new full speed USB device using uhci_hcd and address 5
Oct 14 16:50:59 eddie kernel: usb 2-1: new full speed USB device using uhci_hcd and address 6
Oct 14 16:51:00 eddie kernel: usb 2-1: new full speed USB device using uhci_hcd and address 7
Oct 14 16:51:00 eddie kernel: usb 2-1: new full speed USB device using uhci_hcd and address 8

Die Festplatte ist NICHT defekt.

Mein pacman.log von dem neustart vor dem neustart (damals funktionierte alles noch einwandfrei) bis zu dem neustart, nach dem meine festplatte nicht mehr erkannt wurde:

Code:
[2009-10-11 20:44] removed mplayer (29411-3)
[2009-10-11 20:44] installed mplayer (29411-3)
[2009-10-11 21:10] removed ati-dri (7.5.1-2)
[2009-10-11 21:10] installed ati-dri (7.5.1-2)
[2009-10-11 22:04] removed xf86-video-ati (6.12.4-1)
[2009-10-11 22:05] installed xf86-video-radeonhd (1.2.5-1)
[2009-10-11 22:08] removed xf86-video-radeonhd (1.2.5-1)
[2009-10-11 22:08] installed xf86-video-ati (6.12.4-1)
[2009-10-12 00:25] installed xf86-video-radeonhd (1.2.5-1)
[2009-10-12 14:20] synchronizing package lists
[2009-10-12 14:20] starting full system upgrade
[2009-10-12 14:22] upgraded exiv2 (0.18-1 -> 0.18.2-1)
[2009-10-12 14:22] upgraded exo (0.3.102-1 -> 0.3.104-1)
[2009-10-12 14:22] upgraded git (1.6.4.4-1 -> 1.6.5-1)
[2009-10-12 14:22] upgraded pmount (0.9.19-3 -> 0.9.20-1)
[2009-10-12 14:22] upgraded tdb (3.3.7-1 -> 3.3.8-1)
[2009-10-12 14:22] upgraded smbclient (3.3.7-2 -> 3.3.8-1)
[2009-10-12 14:22] upgraded terminal (0.4.1-1 -> 0.4.2-1)
[2009-10-12 14:22] upgraded xfsprogs (3.0.1-2 -> 3.0.3-1)
[2009-10-12 14:53] installed chromium-snapshot-64 (28460-1)
[2009-10-12 20:40] installed wireshark (1.2.2-1)
[2009-10-12 23:37] synchronizing package lists
[2009-10-12 23:37] starting full system upgrade
[2009-10-13 15:14] installed xclip (0.11-1)
[2009-10-13 15:14] synchronizing package lists
[2009-10-13 15:14] starting full system upgrade
[2009-10-13 15:25] upgraded glib2 (2.20.4-1 -> 2.22.2-1)
[2009-10-13 15:25] upgraded atk (1.26.0-1 -> 1.28.0-1)
[2009-10-13 15:25] installed eggdbus (0.5-1)
[2009-10-13 15:25] installed polkit (0.94-1)
[2009-10-13 15:25] upgraded consolekit (0.3.0-5 -> 0.3.1-1)
[2009-10-13 15:25] upgraded libsoup (2.26.3-1 -> 2.28.0-1)
[2009-10-13 15:25] upgraded pango (1.24.5-1 -> 1.26.0-1)
[2009-10-13 15:25] upgraded gtk2 (2.16.5-1 -> 2.18.2-1)
[2009-10-13 15:25] upgraded gconf (2.26.2-3 -> 2.28.0-1)
[2009-10-13 15:25] upgraded gnome-keyring (2.26.3-1 -> 2.28.0-1)
[2009-10-13 15:25] installed libsoup-gnome (2.28.0-1)
[2009-10-13 15:25] upgraded libgweather (2.26.2.1-1 -> 2.28.0-1)
[2009-10-13 15:25] upgraded libbonobo (2.24.1-1 -> 2.24.2-1)
[2009-10-13 15:25] upgraded evolution-data-server (2.26.3-2 -> 2.28.0-1)
[2009-10-13 15:25] upgraded gconf-editor (2.26.0-1 -> 2.28.0-1)
[2009-10-13 15:25] upgraded libsigc++2.0 (2.2.3-1 -> 2.2.4.2-1)
[2009-10-13 15:25] upgraded glibmm (2.20.1-1 -> 2.22.1-1)
[2009-10-13 15:25] upgraded gnome-desktop (2.26.3-1 -> 2.28.0-1)
[2009-10-13 15:25] upgraded gnome-doc-utils (0.16.1-1 -> 0.18.0-1)
[2009-10-13 15:25] upgraded gnome-icon-theme (2.26.0-1 -> 2.28.0-1)
[2009-10-13 15:25] upgraded pygobject (2.18.0-1 -> 2.20.0-1)
[2009-10-13 15:25] upgraded pygtk (2.14.1-4 -> 2.16.0-1)
[2009-10-13 15:25] upgraded gnome-menus (2.26.2-1 -> 2.28.0.1-1)
[2009-10-13 15:25] upgraded libwnck (2.26.2-1 -> 2.28.0-1)
[2009-10-13 15:25] upgraded gnome-vfs (2.24.1-2 -> 2.24.2-1)
[2009-10-13 15:25] upgraded libgnome (2.26.0-2 -> 2.28.0-1)
[2009-10-13 15:25] upgraded libbonoboui (2.24.1-1 -> 2.24.2-1)
[2009-10-13 15:25] upgraded libgnomeui (2.24.1-1 -> 2.24.2-1)
[2009-10-13 15:26] upgraded gnome-panel (2.26.3-1 -> 2.28.0-1)
[2009-10-13 15:26] upgraded vte (0.20.5-1 -> 0.22.2-1)
[2009-10-13 15:26] upgraded gnome-terminal (2.26.3.1-1 -> 2.28.0-1)
[2009-10-13 15:26] upgraded pangomm (2.24.0-1 -> 2.26.0-1)
[2009-10-13 15:26] upgraded gtkmm (2.16.0-1 -> 2.18.2-1)
[2009-10-13 15:26] upgraded libgphoto2 (2.4.6-2 -> 2.4.6-3)
[2009-10-13 15:26] upgraded libunique (1.0.8-1 -> 1.1.2-1)
[2009-10-13 15:26] installed sg3_utils (1.27-2)
[2009-10-13 15:26] installed libatasmart (0.14-1)
[2009-10-13 15:26] installed devicekit-disks (007-1)
[2009-10-13 15:26] installed gnome-disk-utility (2.28.0-1)
[2009-10-13 15:26] upgraded gvfs (1.2.3-1 -> 1.4.0-1)
[2009-10-13 15:26] upgraded libxklavier (3.9-2 -> 4.0-1)
[2009-10-13 15:26] upgraded kdebase-workspace (4.3.2-1 -> 4.3.2-2)
[2009-10-13 15:26] upgraded kdelibs (4.3.2-3 -> 4.3.2-4)
[2009-10-13 15:26] upgraded libwebkit (1.1.10-2 -> 1.1.15.1-1)
[2009-10-13 15:26] upgraded openssh (5.2p1-1 -> 5.3p1-1)
[2009-10-13 15:26] upgraded poppler (0.10.7-2 -> 0.12.0-1)
[2009-10-13 15:26] upgraded poppler-glib (0.10.7-1 -> 0.12.0-1)
[2009-10-13 15:26] upgraded xfce4-settings (4.6.3-1 -> 4.6.3-2)
[2009-10-13 15:26] upgraded xfce4-xkb-plugin (0.5.3.2-1 -> 0.5.3.3-1)
[2009-10-13 19:19] installed fbgrab (1.0-3)
[2009-10-14 15:37] synchronizing package lists
[2009-10-14 15:37] starting full system upgrade
[2009-10-14 15:39] upgraded bluez (4.54-1 -> 4.56-1)
[2009-10-14 15:40] upgraded curl (7.19.6-1 -> 7.19.6-2)
[2009-10-14 15:40] upgraded dhcpcd (5.1.0-1 -> 5.1.1-1)
[2009-10-14 15:40] >>> Updating module dependencies. Please wait ...
[2009-10-14 15:40] >>> MKINITCPIO SETUP
[2009-10-14 15:40] >>> ----------------
[2009-10-14 15:40] >>> If you use LVM2, Encrypted root or software RAID,
[2009-10-14 15:40] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-10-14 15:40] >>> More information about mkinitcpio setup can be found here:
[2009-10-14 15:40] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-10-14 15:40] 
[2009-10-14 15:40] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2009-10-14 15:40] ==> Building image "default"
[2009-10-14 15:40] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-10-14 15:40] :: Begin build
[2009-10-14 15:40] :: Parsing hook [base]
[2009-10-14 15:40] :: Parsing hook [udev]
[2009-10-14 15:40] :: Parsing hook [autodetect]
[2009-10-14 15:40] :: Parsing hook [pata]
[2009-10-14 15:40] :: Parsing hook [scsi]
[2009-10-14 15:40] :: Parsing hook [sata]
[2009-10-14 15:40] :: Parsing hook [filesystems]
[2009-10-14 15:40] :: Generating module dependencies
[2009-10-14 15:40] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-10-14 15:40] ==> SUCCESS
[2009-10-14 15:40] ==> Building image "fallback"
[2009-10-14 15:40] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-10-14 15:40] :: Begin build
[2009-10-14 15:40] :: Parsing hook [base]
[2009-10-14 15:40] :: Parsing hook [udev]
[2009-10-14 15:40] :: Parsing hook [pata]
[2009-10-14 15:40] :: Parsing hook [scsi]
[2009-10-14 15:40] :: Parsing hook [sata]
[2009-10-14 15:40] :: Parsing hook [filesystems]
[2009-10-14 15:40] :: Generating module dependencies
[2009-10-14 15:40] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-10-14 15:40] ==> SUCCESS
[2009-10-14 15:40] upgraded kernel26 (2.6.31.3-1 -> 2.6.31.4-1)
[2009-10-14 15:40] upgraded libwebkit (1.1.15.1-1 -> 1.1.15.2-1)

wie man sieht, habe ich in der fraglichen session, in der ich das system gefetzt haben muss, extrem viel software installiert, unter anderem auch einen neuen kernel ( 2.6.31.3 -> 2.6.31.4 ) (das kernelupdate war auch der anlass für den neustart)
Ich habe bereits versucht, den kernel auf die alte version zu downgraden; dies hat das problem nicht beseitigt.

In #archlinux konnte/wollte mir niemand helfen.


In der Hoffnung auf Hilfe,
PyroPeter

EDIT:
Ein USB-Stick am gleichen/anderen Anschlüssen funktioniert einwandfrei.

EDIT 2:
Die udevadm ausgabe:
Code:
# udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[1255555265.420105] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1 (usb)
KERNEL[1255555265.420429] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0 (usb)
KERNEL[1255555265.421003] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9 (scsi)
KERNEL[1255555265.421014] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[1255555265.421104] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/usb_device/usbdev1.15 (usb_device)
UDEV  [1255555265.422853] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1 (usb)
UDEV  [1255555265.423332] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/usb_device/usbdev1.15 (usb_device)
UDEV  [1255555265.423612] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0 (usb)
UDEV  [1255555265.423689] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9 (scsi)
UDEV  [1255555265.425642] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[1255555270.419776] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0 (scsi)
KERNEL[1255555270.419795] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[1255555270.419804] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[1255555270.419814] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[1255555270.419824] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg2 (scsi_generic)
KERNEL[1255555270.419835] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
UDEV  [1255555270.420064] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0 (scsi)
UDEV  [1255555270.420420] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UDEV  [1255555270.420431] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
UDEV  [1255555270.420805] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg2 (scsi_generic)
UDEV  [1255555270.422486] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
UDEV  [1255555270.423394] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[1255555270.448212] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[1255555270.448234] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb1 (block)
KERNEL[1255555270.448251] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb2 (block)
KERNEL[1255555270.448262] add      /devices/virtual/bdi/8:16 (bdi)
UDEV  [1255555270.457379] add      /devices/virtual/bdi/8:16 (bdi)
KERNEL[1255555280.215970] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[1255555280.215990] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg2 (scsi_generic)
KERNEL[1255555280.216000] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[1255555280.216009] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[1255555280.216020] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb2 (block)
KERNEL[1255555280.216032] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb1 (block)
KERNEL[1255555280.216041] remove   /devices/virtual/bdi/8:16 (bdi)
KERNEL[1255555280.216051] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[1255555280.216062] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[1255555280.216071] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[1255555280.216080] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9 (scsi)
UDEV  [1255555280.217791] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[1255555280.218072] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0 (usb)
KERNEL[1255555280.218216] remove   /host9/target9:0:0 (scsi)
KERNEL[1255555280.219554] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/usb_device/usbdev1.15 (usb_device)
KERNEL[1255555280.219571] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1 (usb)
UDEV  [1255555280.220609] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
UDEV  [1255555280.223735] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
UDEV  [1255555280.223880] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
UDEV  [1255555280.223925] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg2 (scsi_generic)
UDEV  [1255555280.225152] remove   /host9/target9:0:0 (scsi)
UDEV  [1255555280.230599] remove   /devices/virtual/bdi/8:16 (bdi)
UDEV  [1255555280.230625] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb2 (block)
UDEV  [1255555280.232868] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/usb_device/usbdev1.15 (usb_device)
UDEV  [1255555280.233448] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/scsi_host/host9 (scsi_host)
UDEV  [1255555280.234087] add      /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb1 (block)
UDEV  [1255555280.236375] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb1 (block)
UDEV  [1255555280.238385] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb/sdb2 (block)
UDEV  [1255555280.240938] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
UDEV  [1255555280.242733] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
UDEV  [1255555280.247922] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/host9 (scsi)
UDEV  [1255555280.249362] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0 (usb)
UDEV  [1255555280.251835] remove   /devices/pci0000:00/0000:00:1a.7/usb1/1-1 (usb)

EDIT 3:
slackfan hat sich mein pacman.log durchgelesen und ihm ist diese stelle ins auge gesprungen:
Code:
[2009-10-13 15:26] installed sg3_utils (1.27-2)
[2009-10-13 15:26] installed libatasmart (0.14-1)
[2009-10-13 15:26] installed devicekit-disks (007-1)
[2009-10-13 15:26] installed gnome-disk-utility (2.28.0-1)
[2009-10-13 15:26] upgraded gvfs (1.2.3-1 -> 1.4.0-1)
daraufhin habe ich eine alte version von gvfs eingespielt, gnome-disk-utility und devicekit-disks deinstalliert, und schon war das problem gelöst. toll, nä?

Also: devicekit-disks war schuld, all glory to slackfan.
 
Zuletzt bearbeitet:

Ähnliche Themen

Problem mit SATA

Creative Labs SoundBlaster Audigy 2 ZS unter Debian / Kernel 3.16

[Gelöst] Suchen und ersetzen mit Hilfe mehrerer Parameter

X startet nichtmehr

UDEV rules - How ?

Zurück
Oben