karloff
Routinier
Moin,
hab ein Problem mit umts und Fedora
Die Karte wird zwar erkannt und Netzwerk Manager auch angezeigt wenn sie eingesteckt wird.
Aber sobald ich mich verbinden will versucht er es und die verbindung bricht ab.
Moin,
hab ein Problem mit umts und Fedora
Die Karte wird zwar erkannt und Netzwerk Manager auch angezeigt wenn sie eingesteckt wird.
Aber sobald ich mich verbinden will versucht er es und die verbindung bricht ab.
Hier das syslog wenn die karte eingesteckt wird:
Und hier das ergebniss was abläuft wenn ich versuche mich zu verbinden.
Mir sagt das irgendwie nicht wirklich was, hoffe euch sagt es was und ihr könnt mir sagen was ich fixen muss damit's rennt.
hoffe ihr könnt damit was anfangen und mir sagen wo das problem ist.
hab ein Problem mit umts und Fedora
Die Karte wird zwar erkannt und Netzwerk Manager auch angezeigt wenn sie eingesteckt wird.
Aber sobald ich mich verbinden will versucht er es und die verbindung bricht ab.
Moin,
hab ein Problem mit umts und Fedora
Die Karte wird zwar erkannt und Netzwerk Manager auch angezeigt wenn sie eingesteckt wird.
Aber sobald ich mich verbinden will versucht er es und die verbindung bricht ab.
Hier das syslog wenn die karte eingesteckt wird:
Code:
Jul 3 01:34:39 localhost kernel: pccard: CardBus card inserted into slot 0
Jul 3 01:34:39 localhost kernel: PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
Jul 3 01:34:39 localhost kernel: ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul 3 01:34:39 localhost kernel: ohci_hcd 0000:07:00.0: OHCI Host Controller
Jul 3 01:34:39 localhost kernel: ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
Jul 3 01:34:39 localhost kernel: ohci_hcd 0000:07:00.0: irq 16, io mem 0x34000000
Jul 3 01:34:39 localhost kernel: usb usb6: configuration #1 chosen from 1 choice
Jul 3 01:34:39 localhost kernel: hub 6-0:1.0: USB hub found
Jul 3 01:34:39 localhost kernel: hub 6-0:1.0: 3 ports detected
Jul 3 01:34:39 localhost kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Jul 3 01:34:39 localhost kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 3 01:34:39 localhost kernel: usb usb6: Product: OHCI Host Controller
Jul 3 01:34:39 localhost kernel: usb usb6: Manufacturer: Linux 2.6.25.9-76.fc9.i686 ohci_hcd
Jul 3 01:34:39 localhost kernel: usb usb6: SerialNumber: 0000:07:00.0
Jul 3 01:34:39 localhost kernel: PCI: Enabling device 0000:07:00.1 (0000 -> 0002)
Jul 3 01:34:39 localhost kernel: ACPI: PCI Interrupt 0000:07:00.1[A] -> GSI 16 (level, low) -> IRQ 16
Jul 3 01:34:39 localhost kernel: ehci_hcd 0000:07:00.1: EHCI Host Controller
Jul 3 01:34:39 localhost kernel: ehci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7
Jul 3 01:34:39 localhost kernel: ehci_hcd 0000:07:00.1: irq 16, io mem 0x34001000
Jul 3 01:34:39 localhost kernel: ehci_hcd 0000:07:00.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 3 01:34:39 localhost kernel: usb usb7: configuration #1 chosen from 1 choice
Jul 3 01:34:39 localhost kernel: hub 7-0:1.0: USB hub found
Jul 3 01:34:39 localhost kernel: hub 7-0:1.0: 3 ports detected
Jul 3 01:34:39 localhost kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
Jul 3 01:34:39 localhost kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jul 3 01:34:39 localhost kernel: usb usb7: Product: EHCI Host Controller
Jul 3 01:34:39 localhost kernel: usb usb7: Manufacturer: Linux 2.6.25.9-76.fc9.i686 ehci_hcd
Jul 3 01:34:39 localhost kernel: usb usb7: SerialNumber: 0000:07:00.1
Jul 3 01:34:52 localhost kernel: hub 7-0:1.0: unable to enumerate USB device on port 1
Jul 3 01:34:53 localhost kernel: usb 6-1: new full speed USB device using ohci_hcd and address 2
Jul 3 01:34:53 localhost kernel: usb 6-1: configuration #1 chosen from 1 choice
Jul 3 01:34:53 localhost kernel: usb 6-1: New USB device found, idVendor=12d1, idProduct=1003
Jul 3 01:34:53 localhost kernel: usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 3 01:34:53 localhost kernel: usb 6-1: Product: HUAWEI Mobile
Jul 3 01:34:53 localhost kernel: usb 6-1: Manufacturer: HUAWEI Technologies
Jul 3 01:34:53 localhost kernel: Initializing USB Mass Storage driver...
Jul 3 01:34:53 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Jul 3 01:34:53 localhost kernel: usb 6-1: USB disconnect, address 2
Jul 3 01:34:53 localhost kernel: usbcore: registered new interface driver usb-storage
Jul 3 01:34:53 localhost kernel: USB Mass Storage support registered.
Jul 3 01:34:53 localhost kernel: hub 7-0:1.0: unable to enumerate USB device on port 1
Jul 3 01:34:54 localhost kernel: usb 6-1: new full speed USB device using ohci_hcd and address 3
Jul 3 01:34:54 localhost kernel: usb 6-1: configuration #1 chosen from 1 choice
Jul 3 01:34:54 localhost kernel: usb-storage: probe of 6-1:1.0 failed with error -5
Jul 3 01:34:54 localhost kernel: usb-storage: probe of 6-1:1.1 failed with error -5
Jul 3 01:34:54 localhost kernel: scsi5 : SCSI emulation for USB Mass Storage devices
Jul 3 01:34:54 localhost kernel: usb 6-1: New USB device found, idVendor=12d1, idProduct=1003
Jul 3 01:34:54 localhost kernel: usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 3 01:34:54 localhost kernel: usb 6-1: Product: HUAWEI Mobile
Jul 3 01:34:54 localhost kernel: usb 6-1: Manufacturer: HUAWEI Technologies
Jul 3 01:34:54 localhost kernel: usbcore: registered new interface driver usbserial
Jul 3 01:34:54 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jul 3 01:34:54 localhost kernel: usbcore: registered new interface driver usbserial_generic
Jul 3 01:34:54 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jul 3 01:34:54 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
Jul 3 01:34:54 localhost kernel: option 6-1:1.0: GSM modem (1-port) converter detected
Jul 3 01:34:54 localhost kernel: usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0
Jul 3 01:34:54 localhost kernel: option 6-1:1.1: GSM modem (1-port) converter detected
Jul 3 01:34:54 localhost kernel: usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1
Jul 3 01:34:54 localhost kernel: usbcore: registered new interface driver option
Jul 3 01:34:54 localhost kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
Jul 3 01:34:54 localhost NetworkManager: <info> ttyUSB0: Device is fully-supported using driver 'option'.
Jul 3 01:34:54 localhost NetworkManager: <info> Found new Modem device 'ttyUSB0'.
Jul 3 01:34:54 localhost NetworkManager: <info> (ttyUSB0): exported as /org/freedesktop/Hal/devices/usb_device_12d1_1003_noserial_if0_serial_usb_0
Jul 3 01:34:58 localhost NetworkManager: <info> (ttyUSB0): device state change: 1 -> 2
Jul 3 01:34:58 localhost NetworkManager: <info> (ttyUSB0): deactivating device.
Jul 3 01:34:58 localhost NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed
Jul 3 01:34:58 localhost NetworkManager: <info> (ttyUSB0): device state change: 2 -> 3
Jul 3 01:34:59 localhost kernel: scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
Jul 3 01:34:59 localhost kernel: sr1: scsi-1 drive
Jul 3 01:34:59 localhost kernel: sr 5:0:0:0: Attached scsi generic sg2 type 5
Und hier das ergebniss was abläuft wenn ich versuche mich zu verbinden.
Mir sagt das irgendwie nicht wirklich was, hoffe euch sagt es was und ihr könnt mir sagen was ich fixen muss damit's rennt.
Code:
Jul 3 01:35:02 localhost NetworkManager: <info> Activation (ttyUSB0) starting connection 'Auto GSM network connection'
Jul 3 01:35:02 localhost NetworkManager: <info> (ttyUSB0): device state change: 3 -> 4
Jul 3 01:35:02 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 3 01:35:02 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
Jul 3 01:35:02 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete.
Jul 3 01:35:02 localhost NetworkManager: <info> (ttyUSB0): GSM pin secret required
Jul 3 01:35:02 localhost NetworkManager: <info> (ttyUSB0): device state change: 4 -> 6
Jul 3 01:35:02 localhost NetworkManager: <WARN> verify(): Missing phone number
Jul 3 01:35:02 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
Jul 3 01:35:02 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
Jul 3 01:35:02 localhost NetworkManager: <info> (ttyUSB0): device state change: 6 -> 4
Jul 3 01:35:02 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete.
Jul 3 01:35:09 localhost NetworkManager: <info> Registered on Home network
Jul 3 01:35:09 localhost NetworkManager: <info> Associated with network: +COPS: 0,2,"26203",2
Jul 3 01:35:09 localhost NetworkManager: <info> Connected, Woo!
Jul 3 01:35:09 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) scheduled...
Jul 3 01:35:09 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) starting...
Jul 3 01:35:09 localhost NetworkManager: <info> (ttyUSB0): device state change: 4 -> 5
Jul 3 01:35:09 localhost NetworkManager: <info> Starting pppd connection
Jul 3 01:35:09 localhost NetworkManager: <info> Activation (ttyUSB0) Stage 2 of 5 (Device Configure) complete.
Jul 3 01:35:10 localhost pppd[2762]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
Jul 3 01:35:10 localhost kernel: PPP generic driver version 2.4.2
Jul 3 01:35:10 localhost pppd[2762]: pppd 2.4.4 started by root, uid 0
Jul 3 01:35:10 localhost pppd[2762]: Using interface ppp0
Jul 3 01:35:10 localhost pppd[2762]: Connect: ppp0 <--> /dev/ttyUSB0
Jul 3 01:35:10 localhost NetworkManager: <WARN> impl_ppp_manager_need_secrets(): Cleared secrets, but setting didn't need any secrets.
Jul 3 01:35:10 localhost pppd[2762]: Unable to obtain CHAP password for localhost.localdomain on UMTS_CHAP_SRVR from plugin
Jul 3 01:35:10 localhost pppd[2762]: No CHAP secret found for authenticating us to UMTS_CHAP_SRVR
Jul 3 01:35:10 localhost NetworkManager: <info> (ttyUSB0): device state change: 5 -> 7
Jul 3 01:35:10 localhost pppd[2762]: CHAP authentication succeeded
Jul 3 01:35:10 localhost pppd[2762]: CHAP authentication succeeded
Jul 3 01:35:10 localhost kernel: PPP Deflate Compression module registered
Jul 3 01:35:17 localhost pppd[2762]: Modem hangup
Jul 3 01:35:17 localhost pppd[2762]: Connection terminated.
Jul 3 01:35:17 localhost NetworkManager: <info> (ttyUSB0): device state change: 7 -> 9
Jul 3 01:35:17 localhost NetworkManager: <info> Marking connection 'Auto GSM network connection' invalid.
Jul 3 01:35:17 localhost NetworkManager: <info> Activation (ttyUSB0) failed.
Jul 3 01:35:17 localhost NetworkManager: <info> (ttyUSB0): device state change: 9 -> 3
Jul 3 01:35:17 localhost NetworkManager: <info> (ttyUSB0): deactivating device.
Jul 3 01:35:17 localhost NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed
Jul 3 01:35:18 localhost pppd[2762]: Exit.
hoffe ihr könnt damit was anfangen und mir sagen wo das problem ist.