Stummfilm nach Update auf Suse 10.2 :(

frafi

frafi

Mitglied
(Verlagert in "Hardware - Grafik/Video) Stummfilm nach Update auf Suse 10.2 :(

Hallo allerseits,

hab die ketzten tage von Suse 10.0 auf Suse 10.2 "aufgestockt". Nach der Neuinstallation bekomme ich keinen Sound mehr aus der TV-Karte (Pinnacle PCTV Stereo). Dies betrifft KDETV, tvtime, XdTV .... Soundkarte funktioniert einwandfrei, Kabelbrücke zwischen TV-Karten-Audioausgang und Soundkarten-Line-In ist gesteckt. Line-In funktioniert mit einer anderen Audioquelle (Diskman-LineOut)...Senderscan ist erfolgreich, TV-Bild ist iO

ABER: am Ausgang der TV-Karte ist kein Audiosignal festzustellen (Aktive Lautsprecher direkt drauf gesteckt).

Jetzt die Frage: Weiß jemand, wie und wo yast die Lautstärkeeinstellung beim TV-Karten-Einrichten hinschreibt? Oder wie man den Audio-Ausgang der TV-Karte manuell aktivieren kann? Oder hat sonst jemand eine Idee, wo ich noch suchen könnte?

lsmod bringt das:

Module Size Used by
xt_pkttype 18816 3
ipt_LOG 23808 8
xt_limit 20224 8
snd_pcm_oss 71680 0
snd_mixer_oss 35840 1 snd_pcm_oss
snd_seq 82976 0
snd_seq_device 26516 1 snd_seq
button 24736 0
battery 28168 0
ac 22792 0
ip6t_REJECT 22528 3
xt_tcpudp 20352 3
ipt_REJECT 22528 3
xt_state 19200 12
iptable_mangle 19840 0
iptable_nat 24964 0
ip_nat 37804 1 iptable_nat
iptable_filter 19968 1
ip6table_mangle 19456 0
ip_conntrack 78372 3 xt_state,iptable_nat,ip_nat
nfnetlink 24648 2 ip_nat,ip_conntrack
ip_tables 39400 3 iptable_mangle,iptable_nat,iptable_filter
ip6table_filter 19840 1
ip6_tables 33352 2 ip6table_mangle,ip6table_filter
x_tables 37384 10 xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
ipv6 357728 15 ip6t_REJECT
apparmor 74264 0
aamatch_pcre 31232 1 apparmor
nls_iso8859_1 22016 1
nls_cp437 23808 1
vfat 30976 1
fat 73264 1 vfat
fuse 69168 8
loop 34064 0
dm_mod 81872 0
sg 55080 0
sd_mod 39296 0
rfcomm 75688 0
hidp 50688 2
l2cap 58624 10 rfcomm,hidp
usbhid 69792 0
hci_usb 35740 0
bluetooth 90116 4 rfcomm,hidp,l2cap,hci_usb
usb_storage 105280 0
scsi_mod 173744 3 sg,sd_mod,usb_storage
usblp 32128 0
bt878 28904 0
sn9c102 110220 0
tuner 79784 0
msp3400 48544 0
bttv 222324 3 bt878
video_buf 44804 1 bttv
firmware_class 28288 1 bttv
ir_common 47236 1 bttv
compat_ioctl32 25600 1 bttv
i2c_algo_bit 26248 1 bttv
btcx_risc 22024 1 bttv
tveeprom 33680 1 bttv
videodev 42624 4 sn9c102,bttv
v4l1_compat 28548 1 videodev
v4l2_common 41472 6 sn9c102,tuner,msp3400,bttv,compat_ioctl32,videodev
shpchp 56492 0
pci_hotplug 52228 1 shpchp
ide_cd 59680 0
cdrom 54056 1 ide_cd
i2c_nforce2 24960 0
i2c_core 41472 6 tuner,msp3400,bttv,i2c_algo_bit,tveeprom,i2c_nforce2
ohci_hcd 38404 0
ehci_hcd 51080 0
usbcore 148064 7 usbhid,hci_usb,usb_storage,usblp,sn9c102,ohci_hcd,ehci_hcd
forcedeth 60548 0
snd_intel8x0 54440 2
snd_ac97_codec 127832 1 snd_intel8x0
snd_ac97_bus 19456 1 snd_ac97_codec
snd_pcm 115464 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 44680 2 snd_seq,snd_pcm
snd 89384 12 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 28192 1 snd
snd_page_alloc 27792 2 snd_intel8x0,snd_pcm
ext3 167696 1
mbcache 27016 1 ext3
jbd 90872 1 ext3
edd 27912 0
fan 22408 0
amd74xx 32176 0 [permanent]
thermal 33552 0
processor 53992 1 thermal
ide_disk 34304 10
ide_core 174720 4 usb_storage,ide_cd,amd74xx,ide_disk


lnx010:/home/frank # dmesg | grep bttv
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 201, latency: 64, mmio: 0xeeafe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffe7ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=7 info="PAL / stereo" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok

lnx010:/home/frank # lspci -v
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Unknown device 812a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
I/O ports at e800
I/O ports at e400
Memory at ff6fb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] (prog-if 00 [VGA])
Subsystem: PC Partner Limited Unknown device 7c20
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at d800
Memory at ff5f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff5c0000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2

01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)
Subsystem: PC Partner Limited Unknown device 7c21
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at ff5e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

02:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
Flags: bus master, medium devsel, latency 64, IRQ 201
Memory at eeafe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section)
Flags: medium devsel, IRQ 201
Memory at eeaff000 (32-bit, prefetchable) [disabled] [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

(überflüssiges Zeugs hab ich weggelassen)

thx
 
Zuletzt bearbeitet:
Installier dir die 10.2 komplett neu. Upgrades bei Suse würde ich nie machen.
 
Sorry, hab mich unklar ausgedrückt, das war schon eine Neuinstallation.(Alte gelöscht, Neue drauf).
 
schomal mit alsaconf probiert?
sind die entpsrechenden kernelmodule (nongpl) installiert?
card = 39 [autodetect] bist du sicher dass er die richtige erkannt hat?

das mal durchschecken.

was für einen chipsatz hat die karte?


gruß tuxlover
 
Zuletzt bearbeitet:
nein, das hab ich noch nicht probiert,wie kann ich denn mit alsaconfig den audio-port von der tv-karte ansprechen?

welche kernelmodule meinst du denn genau? v4l-conf,v4l-tools sind installiert, bttv auch,spezielle Treiber vom Hersteller gibts für die Karte nicht

card 39 sollte stimmen, soweit ich das abschätzen kann, weiss aber nicht genau, wie ich das überprüfen kann, bei der 10.0 - Installation war das aber auch die 39, und da liefs

thx
Frank
 
Zuletzt bearbeitet:
Hab inzwischen noch was beim googlen gefunden. Wie es scheint, ist das ein Fehler dr ab Kernel 4.6.15 aufwärts öfter vorkommt. (irgendeine falsche Parameterübergabe bei den Modulen) Also keine echte Chance das noch hinzu bekommen(?).

Trotzdem poste ich mal die meldungen vom msp3400 mit, vielleicht seht ihr ja was Ungewöhnliches. Was mir aufgefallen ist, sind die meldungen mit loudness=0, wenn volume gesetzt wird.Ich weiss aber nicht wirklich ob das ein Fehler ist.

Code: 
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l1 ioctl VIDIOCGAUDIO, dir=r- (0x80287610)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: scart switch: in1 => 0 (ACB=0x0000)
msp3400 2-0040: scart switch: in3 => 1 (ACB=0x0000)
msp3400 2-0040: scart switch: in1 da => 2 (ACB=0x0000)
msp3400 2-0040: set source to 2 (0x200) for output 08
msp3400 2-0040: set source to 2 (0x200) for output 0c
msp3400 2-0040: set source to 2 (0x200) for output 09
msp3400 2-0040: set source to 2 (0x200) for output 0a
msp3400 2-0040: set source to 2 (0x200) for output 41
msp3400 2-0040: set source to 2 (0x200) for output 0b
msp3400 2-0040: msp34xxg thread: wakeup
msp3400 2-0040: thread: restart scan
msp3400 2-0040: thread: no carrier scan
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: msp34xxg thread: sleep
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
bttv0: PLL can sleep, using XTAL (28636363).
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: msp34xxg thread: wakeup
msp3400 2-0040: thread: restart scan
msp3400 2-0040: thread: no carrier scan
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: msp34xxg thread: sleep
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: scart switch: in1 => 0 (ACB=0x0000)
msp3400 2-0040: scart switch: in3 => 1 (ACB=0x0000)
msp3400 2-0040: scart switch: in1 da => 2 (ACB=0x0000)
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: msp34xxg thread: wakeup
msp3400 2-0040: thread: restart scan
msp3400 2-0040: selected M (BTSC) modus
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: started autodetect, waiting for result
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1
bttv0: PLL: 28636363 => 35468950 .. ok
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: thread: restart scan
msp3400 2-0040: selected PAL modus
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: started autodetect, waiting for result
msp3400 2-0040: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639)
msp3400 2-0040: thread: restart scan
msp3400 2-0040: selected PAL modus
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: started autodetect, waiting for result
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: detection still in progress
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: detection still in progress
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: detected standard: could not detect sound standard (0x0000)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: msp34xxg thread: sleep
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_TUNER, dir=-w (0x4054561e)
msp3400 2-0040: set source to 0 (0x20) for output 08
msp3400 2-0040: set source to 0 (0x20) for output 0c
msp3400 2-0040: set source to 0 (0x20) for output 09
msp3400 2-0040: set source to 0 (0x20) for output 0a
msp3400 2-0040: set source to 0 (0x20) for output 41
msp3400 2-0040: set source to 0 (0x20) for output 0b
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)

das war start von kdetv bis beenden

Wenn jemand noch eine Idee hat bitte nicht zurückhalten, bin für jeden
Rat dankbar.
 
Ich Hör Wieder Tv :-))))

Nach Update der kompletten yast2-pakete und des kernels mit den Paketen aus dem factory-bereich und löschen + neu anlegen der tv-karte mit yast HÖR ICH WIEDER WAS!!
 
Anmelden, um zu antworten.

Ähnliche Themen

Rollei Mini Wifi Camcorder
Rollei Mini Wifi Camcorder: Besitze oben genannte Kamera. Per Wifi kann man eine Direktverbindung aufbauen. Wlan ist offen, lässt sich auch nicht ändern und Port 23 offen. Kann mich...

OpenSuse 12.3 / Tiefschlaf funktioniert nicht
OpenSuse 12.3 / Tiefschlaf funktioniert nicht: Hallo zusammen. Ein altes Thema mal wieder. Aber ich bekomme es mit Google und Co. leider nicht gelöst. Vielleicht weiß einer von euch Rat. Der...

Displayport + externer Monitor zeigt bei startx nichts erst bei DVI
Displayport + externer Monitor zeigt bei startx nichts erst bei DVI: Hallo ich habe auf meinem ThinkPad T420 i5 Intel HD3000 Grafikkarte onboard 16 GB RAM OpenBSD snapshot amd64 ist von märz installiert wenn nur...

X not starting anymore since filesystem was full
X not starting anymore since filesystem was full: Hallo zusammen, habe mal ein Problem mit meinem OpenSuse was ich nicht wirklich hinbekomme. Ich hatt es frisch installiert und gut 3 Monate genutzt. Dann...

NagiosGrapher 1.7.1 funktioniert nicht
NagiosGrapher 1.7.1 funktioniert nicht: Hallo zusammen, ich habe auf einem Server mit CentOS 6.4 x86_64 und Nagios Core 3.5.0 versucht den NagiosGrapher 1.7.1 zu installieren. Die Installation...

Neueste Beiträge

Neueste Themen

Zurück
Oben