SUSe Block Port

[Lord Zipacna]

Hi Leute,

sorry aber ich drehe echt bald durch.
Ich habe schon bestimmt 15 Boards durch und nie eine gute Antwort bekommen.
Ich möchte gerne mit der Suse FW2 einen bestimmten Port eines UDP´s einer Ip Blocken. Leider weiß ich nicht wie ich das einstellen muß.
So könnte miene config aussehen. Wie muß ich nun eintragen.
Wenn ich zum beispiel von der Ip 80.80.80.106 den Port 29520 UDP Blocken will.

Es soll alles geblockt werden bis auf die Ports
23000 15862 4711 8532 UDP und TCP Ip sollen offen sein

Danke für alles

Ralf



# Copyright (c) 2000-2002 SuSE GmbH Nuernberg, Germany. All rights reserved.
#
# Author: Marc Heuse <marc@suse.de>, 2002
# Please contact me directly if you find bugs.
#
# If you have problems getting this tool configures, please read this file
# carefuly and take also a look into
# -> /usr/share/doc/packages/SuSEfirewall2/EXAMPLES !
# -> /usr/share/doc/packages/SuSEfirewall2/FAQ !
# -> /usr/share/doc/packages/SuSEfirewall2/SuSEfirewall2.conf.EXAMPLE !
#
# /etc/sysconfig/SuSEfirewall2
#
# for use with /sbin/SuSEfirewall2 version 3.1 which is for 2.4 kernels!
#
# ------------------------------------------------------------------------ #
# PLEASE NOTE THE FOLLOWING:
#
# Just by configuring these settings and using the SuSEfirewall2 you are
# not secure per se! There is *not* such a thing you install and hence you
# are safed from all (security) hazards.
#
# To ensure your security, you need also:
#
# * Secure all services you are offering to untrusted networks (internet)
# You can do this by using software which has been designed with
# security in mind (like postfix, apop3d, ssh), setting these up without
# misconfiguration and praying, that they have got really no holes.
# SuSEcompartment can help in most circumstances to reduce the risk.
# * Do not run untrusted software. (philosophical question, can you trust
# SuSE or any other software distributor?)
# * Harden your server(s) with the harden_suse package/script
# * Recompile your kernel with the openwall-linux kernel patch
# (former secure-linux patch, from Solar Designer) www.openwall.com
# * Check the security of your server(s) regulary
# * If you are using this server as a firewall/bastion host to the internet
# for an internal network, try to run proxy services for everything and
# disable routing on this machine.
# * If you run DNS on the firewall: disable untrusted zone transfers and
# either don't allow access to it from the internet or run it split-brained.
#
# Good luck!
#
# Yours,
# SuSE Security Team
#
# ------------------------------------------------------------------------
#
# Configuration HELP:
#
# If you have got any problems configuring this file, take a look at
# /usr/share/doc/packages/SuSEfirewall2/EXAMPLES for an example.
#
#
# All types have to set enable SuSEfirewall2 in the runlevel editor
#
# If you are a end-user who is NOT connected to two networks (read: you have
# got a single user system and are using a dialup to the internet) you just
# have to configure (all other settings are OK): 2) and maybe 9).
#
# If this server is a firewall, which should act like a proxy (no direct
# routing between both networks), or you are an end-user connected to the
# internet and to an internal network, you have to setup your proxys and
# reconfigure (all other settings are OK): 2), 3), 9) and maybe 7), 11), 14)
#
# If this server is a firewall, and should do routing/masquerading between
# the untrusted and the trusted network, you have to reconfigure (all other
# settings are OK): 2), 3), 5), 6), 9), and maybe 7), 10), 11), 12), 13),
# 14), 20)
#
# If you want to run a DMZ in either of the above three standard setups, you
# just have to configure *additionally* 4), 9), 12), 13), 17), 19).
#
# If you know what you are doing, you may also change , 11), 15), 16)
# and the expert options 19), 20), 21), 22) and 23) at the far end, but you
# should NOT.
#
# If you use diald or ISDN autodialing, you might want to set 17).
#
# To get programs like traceroutes to your firewall to work is a bit tricky,
# you have to set the following options to "yes" : 11 (UDP only), 18 and 19.
#
# Please note that if you use service names, that they exist in /etc/services.
# There is no service "dns", it's called "domain"; email is called "smtp" etc.
#
# *Any* routing between interfaces except masquerading requires to set FW_ROUTE
# to "yes" and use FW_FORWARD or FW_ALLOW_CLASS_ROUTING !
#
# If you just want to do masquerading without filtering, ignore this script
# and run this line (exchange "ippp0" "ppp0" if you use a modem, not isdn):
# iptables -A POSTROUTING -t nat -j MASQUERADE -o ippp0
# echo 1 > /proc/sys/net/ipv4/ip_forward
# and additionally the following lines to get at least a minimum of security:
# iptables -A INPUT -j DROP -m state --state NEW,INVALID -i ippp0
# iptables -A FORWARD -j DROP -m state --state NEW,INVALID -i ippp0
# ------------------------------------------------------------------------

## Path: Network/Firewall/SuSEfirewall2
## Description: SuSEfirewall2 configuration
## Type: yesno
## Default: no
## ServiceRestart: SuSEfirewall2_setup
#
# 1.)
# Should the Firewall run in quickmode?
#
# "Quickmode" means that only the interfaces pointing to external networks
# are secured, and no other. all interfaces not in the list of FW_DEV_EXT
# are allowed full network access! Additionally, masquerading is
# automatically activated for FW_MASQ_DEV devices. and last but not least:
# all incoming connection via external interfaces are REJECTED.
# You will only need to configure 2.) and FW_MASQ_DEV in 6.)
# Optionally, you may add entries to section 9a.)
#
# Choice: "yes" or "no", if not set defaults to "no"
#
FW_QUICKMODE="no"

## Type: string
# 2.)
# Which is the interface that points to the internet/untrusted networks?
#
# Enter all the network devices here which are untrusted.
#
# Choice: any number of devices, seperated by a space
# e.g. "eth0", "ippp0 ippp1 eth0:1"
#
FW_DEV_EXT="eth0"

## Type: string
#
# 3.)
# Which is the interface that points to the internal network?
#
# Enter all the network devices here which are trusted.
# If you are not connected to a trusted network (e.g. you have just a
# dialup) leave this empty.
#
# Choice: leave empty or any number of devices, seperated by a space
# e.g. "tr0", "eth0 eth1 eth1:1" or ""
#
FW_DEV_INT="eth0"

## Type: string
#
# 4.)
# Which is the interface that points to the dmz or dialup network?
#
# Enter all the network devices here which point to the dmz/dialups.
# A "dmz" is a special, seperated network, which is only connected to the
# firewall, and should be reachable from the internet to provide services,
# e.g. WWW, Mail, etc. and hence are at risk from attacks.
# See /usr/share/doc/packages/SuSEfirewall2/EXAMPLES for an example.
#
# Special note: You have to configure FW_FORWARD to define the services
# which should be available to the internet and set FW_ROUTE to yes.
#
# Choice: leave empty or any number of devices, seperated by a space
# e.g. "tr0", "eth0 eth1 eth1:1" or ""
#
FW_DEV_DMZ=""

## Type: yesno
## Default: no
#
# 5.)
# Should routing between the internet, dmz and internal network be activated?
# REQUIRES: FW_DEV_INT or FW_DEV_DMZ
#
# You need only set this to yes, if you either want to masquerade internal
# machines or allow access to the dmz (or internal machines, but this is not
# a good idea). This option supersedes IP_FORWARD from
# /etc/sysconfig/network/options
#
# Setting this option one alone doesn't do anything. Either activate
# massquerading with FW_MASQUERADE below if you want to masquerade your
# internal network to the internet, or configure FW_FORWARD to define
# what is allowed to be forwarded!
#
# Choice: "yes" or "no", if not set defaults to "no"
#
FW_ROUTE="yes"

## Type: yesno
## Default: no
#
# 6.)
# Do you want to masquerade internal networks to the outside?
# REQUIRES: FW_DEV_INT or FW_DEV_DMZ, FW_ROUTE
#
# "Masquerading" means that all your internal machines which use services on
# the internet seem to come from your firewall.
# Please note that it is more secure to communicate via proxies to the
# internet than masquerading. This option is required for FW_MASQ_NETS and
# FW_FORWARD_MASQ.
#
# Choice: "yes" or "no", if not set defaults to "no"
#
FW_MASQUERADE="yes"

## Type: string
#
# You must also define on which interface(s) to masquerade on. This is
# normally your external device(s) to the internet.
# Most users can leave the default below.
#
# e.g. "ippp0" or "$FW_DEV_EXT"
FW_MASQ_DEV="$FW_DEV_EXT"

## Type: string
#
# Which internal computers/networks are allowed to access the internet
# directly (not via proxys on the firewall)?
# Only these networks will be allowed access and will be masqueraded!
#
# Choice: leave empty or any number of hosts/networks seperated by a space.
# Every host/network may get a list of allowed services, otherwise everything
# is allowed. A target network, protocol and service is appended by a comma to
# the host/network. e.g. "10.0.0.0/8" allows the whole 10.0.0.0 network with
# unrestricted access. "10.0.1.0/24,0/0,tcp,80 10.0.1.0/24,0/0tcp,21" allows
# the 10.0.1.0 network to use www/ftp to the internet.
# "10.0.1.0/24,tcp,1024:65535 10.0.2.0/24" is OK too.
# Set this variable to "0/0" to allow unrestricted access to the internet.
#
FW_MASQ_NETS="0/0"

## Type: yesno
## Default: yes
#
# 7.)
# Do you want to protect the firewall from the internal network?
# REQUIRES: FW_DEV_INT
#
# If you set this to "yes", internal machines may only access services on
# the machine you explicitly allow. They will be also affected from the
# FW_AUTOPROTECT_SERVICES option.
# If you set this to "no", any user can connect (and attack) any service on
# the firewall.
#
# Choice: "yes" or "no", if not set defaults to "yes"
#
# "yes" is a good choice
FW_PROTECT_FROM_INTERNAL="no"

## Type: yesno
## Default: yes
#
# 8.)
# Do you want to autoprotect all running network services on the firewall?
#
# If set to "yes", all network access to services TCP and UDP on this machine
# will be prevented (except to those which you explicitly allow, see below:
# FW_SERVICES_{EXT,DMZ,INT}_{TCP,UDP})
#
# Choice: "yes" or "no", if not set defaults to "yes"
#
FW_AUTOPROTECT_SERVICES="no"

## Type: string
#
# 9.)
# Which services ON THE FIREWALL should be accessible from either the internet
# (or other untrusted networks), the dmz or internal (trusted networks)?
# (see no.13 & 14 if you want to route traffic through the firewall) XXX
#
# Enter all ports or known portnames below, seperated by a space.
# TCP services (e.g. SMTP, WWW) must be set in FW_SERVICES_*_TCP, and
# UDP services (e.g. syslog) must be set in FW_SERVICES_*_UDP.
# e.g. if a webserver on the firewall should be accessible from the internet:
# FW_SERVICES_EXT_TCP="www"
# e.g. if the firewall should receive syslog messages from the dmz:
# FW_SERVICES_DMZ_UDP="syslog"
# For IP protocols (like GRE for PPTP, or OSPF for routing) you need to set
# FW_SERVICES_*_IP with the protocol name or number (see /etc/protocols)
#
# Choice: leave empty or any number of ports, known portnames (from
# /etc/services) and port ranges seperated by a space. Port ranges are
# written like this: allow port 1 to 10 -> "1:10"
# e.g. "", "smtp", "123 514", "3200:3299", "ftp 22 telnet 512:514"
# For FW_SERVICES_*_IP enter the protocol name (like "igmp") or number ("2")
#
# Common: smtp domain
FW_SERVICES_EXT_TCP="23000 15862 4711 8532 "

## Type: string
# Common: domain
FW_SERVICES_EXT_UDP="23000 15862 4711 8532 "
# Common: domain

## Type: string
# For VPN/Routing which END at the firewall!!
FW_SERVICES_EXT_IP=""

## Type: string
#
# Common: smtp domain
FW_SERVICES_DMZ_TCP=""

## Type: string
# Common: domain
FW_SERVICES_DMZ_UDP=""

## Type: string
# For VPN/Routing which END at the firewall!!
FW_SERVICES_DMZ_IP=""

## Type: string
#
# Common: ssh smtp domain
FW_SERVICES_INT_TCP=""

## Type: string
# Common: domain syslog
FW_SERVICES_INT_UDP=""

# For VPN/Routing which END at the firewall!!
FW_SERVICES_INT_IP=""

## Type: string
# 9a.)
# External services in QUICKMODE.
# This is only used for QUICKMODE (see 1.)!
# (The settings here are similar to section 9.)
# Which services ON THE FIREWALL should be accessible from either the
# internet (or other untrusted networks), i.e. the external interface(s)
# $FW_DEV_EXT
#
# Enter all ports or known portnames below, seperated by a space.
# TCP services (e.g. SMTP, WWW) must be set in FW_SERVICES_QUICK_TCP, and
# UDP services (e.g. syslog) must be set in FW_SERVICES_QUICK_UDP.
# e.g. if a secure shell daemon on the firewall should be accessible from
# the internet:
# FW_SERVICES_QUICK_TCP="ssh"
# e.g. if the firewall should receive isakmp (IPsec) internet:
# FW_SERVICES_QUICK_UDP="isakmp"
# For IP protocols (like IPsec) you need to set
# FW_SERVICES_QUICK_IP="50"
#
# Choice: leave empty or any number of ports, known portnames (from
# /etc/services) and port ranges seperated by a space. Port ranges are
# written like this: allow port 1 to 10 -> "1:10"
# e.g. "", "smtp", "123 514", "3200:3299", "ftp 22 telnet 512:514"
# For FW_SERVICES_*_IP enter the protocol name (like "igmp") or number ("2")
#
# QUICKMODE: TCP services open to external networks (InterNet)
# (Common: ssh smtp)
FW_SERVICES_QUICK_TCP=""

## Type: string
# QUICKMODE: UDP services open to external networks (InterNet)
# (Common: isakmp)
FW_SERVICES_QUICK_UDP=""

## Type: string
# QUICKMODE: IP protocols unconditionally open to external networks (InterNet)
# (For VPN firewall that is VPN gateway: 50)
FW_SERVICES_QUICK_IP=""

## Type: string
#
# 10.)
# Which services should be accessible from trusted hosts/nets?
#
# Define trusted hosts/networks (doesnt matter if they are internal or
# external) and the TCP and/or UDP services they are allowed to use.
# Please note that a trusted host/net is *not* allowed to ping the firewall
# until you set it to allow also icmp!
#
# Choice: leave FW_TRUSTED_NETS empty or any number of computers and/or
# networks, seperated by a space. e.g. "172.20.1.1 172.20.0.0/16"
# Optional, enter a protocol after a comma, e.g. "1.1.1.1,icmp"
# Optional, enter a port after a protocol, e.g. "2.2.2.2,tcp,22"
#
FW_TRUSTED_NETS=""

## Type: string
#
# 11.)
# How is access allowed to high (unpriviliged [above 1023]) ports?
#
# You may either allow everyone from anyport access to your highports ("yes"),
# disallow anyone ("no"), anyone who comes from a defined port (portnumber or
# known portname) [note that this is easy to circumvent!], or just your
# defined nameservers ("DNS").
# Note that you can't use rpc requests (e.g. rpcinfo, showmount) as root
# from a firewall using this script (well, you can if you include range
# 600:1023 in FW_SERVICES_EXT_UDP ...).
# Please note that with v2.1 "yes" is not mandatory for active FTP from
# the firewall anymore.
#
# Choice: "yes", "no", "DNS", portnumber or known portname,
# if not set defaults to "no"
#
# Common: "ftp-data", better is "yes" to be sure that everything else works
FW_ALLOW_INCOMING_HIGHPORTS_TCP="no"

## Type: string
# Common: "DNS" or "domain ntp", better is "yes" to be sure ...
FW_ALLOW_INCOMING_HIGHPORTS_UDP="DNS"

## Type: yesno
## Default: yes
#
# 12.)
# Are you running some of the services below?
# They need special attention - otherwise they won´t work!
#
# Set services you are running to "yes", all others to "no",
# if not set defaults to "no"
# If you want to offer the below services to your DMZ as well,
# (and not just internally), set the switches below to "dmz",
# if you even want to offer to the world as well, set to "ext"
# instead of "yes" (NOT RECOMMENDED FOR SECURITY REASONS!)
#
FW_SERVICE_AUTODETECT="yes"
# Autodetect the services below when starting

## Type: yesno
## Default: no
# If you are running bind/named set to yes. Remember that you have to open
# port 53 (or "domain") as udp/tcp to allow incoming queries.
# Also FW_ALLOW_INCOMING_HIGHPORTS_UDP needs to be "yes"
FW_SERVICE_DNS="no"

## Type: yesno
## Default: no
# if you use dhclient to get an ip address you have to set this to "yes" !
FW_SERVICE_DHCLIENT="no"

## Type: yesno
## Default: no
# set to "yes" if this server is a DHCP server
FW_SERVICE_DHCPD="no"

## Type: yesno
## Default: no
# set to "yes" if this server is running squid. You still have to open the
# tcp port 3128 to allow remote access to the squid proxy service.
FW_SERVICE_SQUID="no"

## Type: yesno
## Default: no
# set to "yes" if this server is running a samba server. You still have to
# open the tcp port 139 to allow remote access to SAMBA.
FW_SERVICE_SAMBA="no"

## Type: string
#
# 13.)
# Which services accessed from the internet should be allowed to the
# dmz (or internal network - if it is not masqueraded)?
# REQUIRES: FW_ROUTE
#
# With this option you may allow access to e.g. your mailserver. The
# machines must have valid, non-private, IP addresses which were assigned to
# you by your ISP. This opens a direct link to your network, so only use
# this option for access to your dmz!!!!
#
# Choice: leave empty (good choice!) or use the following explained syntax
# of forwarding rules, seperated each by a space.
# A forwarding rule consists of 1) source IP/net and 2) destination IP
# seperated by a comma. e.g. "1.1.1.1,2.2.2.2 3.3.3.3/16,4.4.4.4/24"
# Optional is a protocol, seperated by a comma, e.g. "5.5.5.5,6.6.6.6,igmp"
# Optional is a port after the protocol with a comma, e.g. "0/0,0/0,udp,514"
#
FW_FORWARD=""
# Beware to use this!

## Type: string
#
# 14.)
# Which services accessed from the internet should be allowed to masqueraded
# servers (on the internal network or dmz)?
# REQUIRES: FW_ROUTE
#
# With this option you may allow access to e.g. your mailserver. The
# machines must be in a masqueraded segment and may not have public IP addesses!
# Hint: if FW_DEV_MASQ is set to the external interface you have to set
# FW_FORWARD from internal to DMZ for the service as well to allow access
# from internal!
#
# Please note that this should *not* be used for security reasons! You are
# opening a hole to your precious internal network. If e.g. the webserver there
# is compromised - your full internal network is compromised!!
#
# Choice: leave empty (good choice!) or use the following explained syntax
# of forward masquerade rules, seperated each by a space.
# A forward masquerade rule consists of 1) source IP/net, 2) the IP to which
# the requests will be forwarded to (in the dmz/intern net), 3) a protocol
# (tcp/udp only!) and 4) destination port, seperated by a comma (","), e.g.
# "4.0.0.0/8,1.1.1.1,tcp,80"
#
# Optional is a port after the destination port, to redirect the request to
# a different destination port on the destination IP, e.g.
# "4.0.0.0/8,1.1.1.1,tcp,80,81"
#
# Optional is an target IP address on which should the masquerading be decided.
# You have to set the optional port option to use this.
#
# Example:
# 200.200.200.0/24,10.0.0.10,tcp,80,81,202.202.202.202
# The class C network 200.200.200.0/24 trying to access 202.202.202.202 port
# 80 will be forwarded to the internal server 10.0.0.10 on port 81.
# Example:
# 200.200.200.0/24,10.0.0.10,tcp,80
# The class C network 200.200.200.0/24 trying to access anything which goes
# through this firewall ill be forwarded to the internal server 10.0.0.10 on
# port 80
#
FW_FORWARD_MASQ=""
# Beware to use this!

## Type: string
#
# 15.)
# Which accesses to services should be redirected to a localport on the
# firewall machine?
#
# This can be used to force all internal users to surf via your squid proxy,
# or transparently redirect incoming webtraffic to a secure webserver.
#
# Choice: leave empty or use the following explained syntax of redirecting
# rules, seperated by a space.
# A redirecting rule consists of 1) source IP/net, 2) destination IP/net,
# 3) protocol (tcp or udp) 3) original destination port and 4) local port to
# redirect the traffic to, seperated by a colon. e.g.:
# "10.0.0.0/8,0/0,tcp,80,3128 0/0,172.20.1.1,tcp,80,8080"
# Please note that as 2) destination, you may add '!' in front of the IP/net
# to specify everything EXCEPT this IP/net.
#
FW_REDIRECT=""

## Type: yesno
## Default: yes
#
# 16.)
# Which logging level should be enforced?
# You can define to log packets which were accepted or denied.
# You can also the set log level, the critical stuff or everything.
# Note that logging *_ALL is only for debugging purpose ...
#
# Choice: "yes" or "no", if not set FW_LOG_*_CRIT defaults to "yes", and
# FW_LOG_*_ALL defaults to "no"
#
FW_LOG_DROP_CRIT="yes"

## Type: yesno
## Default: no
#
FW_LOG_DROP_ALL="no"

## Type: yesno
## Default: yes
#
FW_LOG_ACCEPT_CRIT="yes"

## Type: yesno
## Default: no
#
FW_LOG_ACCEPT_ALL="no"

## Type: string
#
# only change/activate this if you know what you are doing!
FW_LOG="--log-level warning --log-tcp-options --log-ip-option --log-prefix SuSE-FW"

## Type: yesno
## Default: yes
#
# 17.)
# Do you want to enable additional kernel TCP/IP security features?
# If set to yes, some obscure kernel options are set.
# (icmp_ignore_bogus_error_responses, icmp_echoreply_rate,
# icmp_destunreach_rate, icmp_paramprob_rate, icmp_timeexeed_rate,
# ip_local_port_range, log_martians, mc_forwarding, mc_forwarding,
# rp_filter, routing flush)
# Tip: Set this to "no" until you have verified that you have got a
# configuration which works for you. Then set this to "yes" and keep it
# if everything still works. (It should!)
#
# Choice: "yes" or "no", if not set defaults to "yes"
#
FW_KERNEL_SECURITY="yes"

## Type: yesno
## Default: no
#
# 18.)
# Keep the routing set on, if the firewall rules are unloaded?
# REQUIRES: FW_ROUTE
#
# If you are using diald, or automatic dialing via ISDN, if packets need
# to be sent to the internet, you need to turn this on. The script will then
# not turn off routing and masquerading when stopped.
# You *might* also need this if you have got a DMZ.
# Please note that this is *insecure*! If you unload the rules, but are still
# connected, you might your internal network open to attacks!
# The better solution is to remove "/sbin/SuSEfirewall2 stop" or
# "/sbin/init.d/firewall stop" from the ip-down script!
#
#
# Choices "yes" or "no", if not set defaults to "no"
#
FW_STOP_KEEP_ROUTING_STATE="no"

## Type: yesno
## Default: yes
#
# 19.)
# Allow (or don't) ICMP echo pings on either the firewall or the dmz from
# the internet? The internet option is for allowing the DMZ and the internal
# network to ping the internet.
# REQUIRES: FW_ROUTE for FW_ALLOW_PING_DMZ and FW_ALLOW_PING_EXT
#
# Choice: "yes" or "no", defaults to "no" if not set
#
FW_ALLOW_PING_FW="yes"

## Type: yesno
## Default: no
#
FW_ALLOW_PING_DMZ="no"

## Type: yesno
## Default: no
#
FW_ALLOW_PING_EXT="no"

##
# END of /etc/sysconfig/SuSEfirewall2
##

# #
#-------------------------------------------------------------------------#
# #
# EXPERT OPTIONS - all others please don't change these! #
# #
#-------------------------------------------------------------------------#
# #

## Type: yesno
## Default: yes
#
# 20.)
# Allow (or don't) ICMP time-to-live-exceeded to be send from your firewall.
# This is used for traceroutes to your firewall (or traceroute like tools).
#
# Please note that the unix traceroute only works if you say "yes" to
# FW_ALLOW_INCOMING_HIGHPORTS_UDP, and windows traceroutes only if you say
# additionally "yes" to FW_ALLOW_PING_FW
#
# Choice: "yes" or "no", if not set defaults to "no"
#
FW_ALLOW_FW_TRACEROUTE="yes"

## Type: yesno
## Default: yes
#
# 21.)
# Allow ICMP sourcequench from your ISP?
#
# If set to yes, the firewall will notice when connection is choking, however
# this opens yourself to a denial of service attack. Choose your poison.
#
# Choice: "yes" or "no", if not set defaults to "yes"
#
FW_ALLOW_FW_SOURCEQUENCH="yes"

## Type: yesno
## Default: no
#
# 22.)
# Allow/Ignore IP Broadcasts?
#
# If set to yes, the firewall will not filter broadcasts by default.
# This is needed e.g. for Netbios/Samba, RIP, OSPF where the broadcast
# option is used.
# If you do not want to allow them however ignore the annoying log entries,
# set FW_IGNORE_FW_BROADCAST to yes.
#
# Choice: "yes" or "no", if not set defaults to "no"
#
FW_ALLOW_FW_BROADCAST="no"

## Type: yesno
## Default: yes
#
FW_IGNORE_FW_BROADCAST="yes"

## Type: yesno
## Default: no
#
# 23.)
# Allow same class routing per default?
# REQUIRES: FW_ROUTE
#
# Do you want to allow routing between interfaces of the same class
# (e.g. between all internet interfaces, or all internal network interfaces)
# be default (so without the need setting up FW_FORWARD definitions)?
#
# Choice: "yes" or "no", if not set defaults to "no"
#
FW_ALLOW_CLASS_ROUTING="no"

## Type: string
#
# 25.)
# Do you want to load customary rules from a file?
#
# This is really an expert option. NO HELP WILL BE GIVEN FOR THIS!
# READ THE EXAMPLE CUSTOMARY FILE AT /etc/sysconfig/scripts/SuSEfirewall2-custom
#
#FW_CUSTOMRULES="/etc/sysconfig/scripts/SuSEfirewall2-custom"
FW_CUSTOMRULES=""

## Type: yesno
## Default: no
#
# 26.)
# Do you want to REJECT packets instead of DROPing?
#
# DROPing (which is the default) will make portscans and attacks much
# slower, as no replies to the packets will be sent. REJECTing means, that
# for every illegal packet, a connection reject packet is sent to the
# sender.
#
# Choice: "yes" or "no", if not set defaults to "no"
#
FW_REJECT="no"

## Type: string
#
# 27.)
# Tuning your upstream a little bit via HTB (Hierarchical Token Bucket)
# for more information about HTB see http://www.lartc.org
#
# If your download collapses while you have a parallel upload,
# this parameter might be an option for you. It manages your
# upload stream and reserves bandwidth for special packets like
# TCP ACK packets or interactive SSH.
# It's a list of devices and maximum bandwidth in kbit.
# For example, the german TDSL account, provides 128kbit/s upstream
# and 768kbit/s downstream. We can only tune the upstream.
#
# Example:
# If you want to tune a 128kbit/s upstream DSL device like german TDSL set
# the following values:
# FW_HTB_TUNE_DEV="ppp0,125"
# where ppp0 is your pppoe device and 125 stands for 125kbit/s upstream
#
# you might wonder why 125kbit/s and not 128kbit/s. Well practically you'll
# get a better performance if you keep the value a few percent under your
# real maximum upload bandwidth, to prevent the DSL modem from queuing traffic in
# it's own buffers because queing is done by us now.
# So for a 256kbit upstream
# FW_HTB_TUNE_DEV="ppp0,250"
# might be a better value than "ppp0,256". There is no perfect value for a
# special kind of modem. The perfect value depends on what kind of traffic you
# have on your line but 5% under your maximum upstream might be a good start.
# Everthing else is special fine tuning.
# If you want to know more about the technical background,
# http://tldp.org/HOWTO/ADSL-Bandwidth-Management-HOWTO/
# is a good start

 

[damager]

laufen diese von dir gennaten UDP dienste auf dem firewall-rechner oder irgendwo intern in deinem netz?

das sollten diese ports IMHO auch unter
FW_SERVICES_INT_TCP="" bzw.
FW_SERVICES_INT_UDP=""
eingetragen werden.

oder du benutzt den quickmode und trägst sie unter:
FW_SERVICES_QUICK_TCP=""
FW_SERVICES_QUICK_UDP=""
ein.

ansonsten halte ich eh nicht viel von der suse-firewall ...hat noch nie so richtig funktioniert.

 

[Lord Zipacna]

Hi ja es laufen alle sachen auf dem Rechner.
Nicht aus dem internen Netzwerk. Er ist alleine auf einer Leitung und soll halt nur den einen Port Blocken.

iptables -A OUTPUT -o eth0 -d 233.54.8.54 -p udp --dport 52910 -j DROP

wie kann ich das einstellen ?
Kann ich ein Scrpit machen was der Rechner gleich beim laden mit läd ?
Ich meine es so beim booten läd er an mache alles zu und dann sage ich mach das und das frei


Wenn ich das richtig verstehe brauche ich dann keine FW2 mehr


#!/bin/bash
case "$1" in
start)
echo "Starte IP-Paketfilter"

# iptables-Modul
modprobe ip_tables
# Connection-Tracking-Module
modprobe ip_conntrack
# Das Modul ip_conntrack_irc ist erst bei Kerneln >= 2.4.19 verfuegbar
modprobe ip_conntrack_irc
modprobe ip_conntrack_ftp

# Tabelle flushen
iptables -F
iptables -t nat -F
iptables -t mangle -F
iptables -X
iptables -t nat -X
iptables -t mangle -X

# Default-Policies setzen
iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP

# MY_REJECT-Chain
iptables -N MY_REJECT

# MY_REJECT fuellen
iptables -A MY_REJECT -p tcp -m limit --limit 7200/h -j LOG --log-prefix "REJECT TCP "
iptables -A MY_REJECT -p tcp -j REJECT --reject-with tcp-reset
iptables -A MY_REJECT -p udp -m limit --limit 7200/h -j LOG --log-prefix "REJECT UDP "
iptables -A MY_REJECT -p udp -j REJECT --reject-with icmp-port-unreachable
iptables -A MY_REJECT -p icmp -m limit --limit 7200/h -j LOG --log-prefix "DROP ICMP "
iptables -A MY_REJECT -p icmp -j DROP
iptables -A MY_REJECT -m limit --limit 7200/h -j LOG --log-prefix "REJECT OTHER "
iptables -A MY_REJECT -j REJECT --reject-with icmp-proto-unreachable

# MY_DROP-Chain
iptables -N MY_DROP
iptables -A MY_DROP -m limit --limit 7200/h -j LOG --log-prefix "PORTSCAN DROP "
iptables -A MY_DROP -j DROP

# Alle verworfenen Pakete protokollieren
iptables -A INPUT -m state --state INVALID -m limit --limit 7200/h -j LOG --log-prefix "INPUT INVALID "
iptables -A OUTPUT -m state --state INVALID -m limit --limit 7200/h -j LOG --log-prefix "OUTPUT INVALID "

# Korrupte Pakete zurueckweisen
iptables -A INPUT -m state --state INVALID -j DROP
iptables -A OUTPUT -m state --state INVALID -j DROP

# Stealth Scans etc. DROPpen
# Keine Flags gesetzt
iptables -A INPUT -p tcp --tcp-flags ALL NONE -j MY_DROP

# SYN und FIN gesetzt
iptables -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j MY_DROP

# SYN und RST gleichzeitig gesetzt
iptables -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -j MY_DROP

# FIN und RST gleichzeitig gesetzt
iptables -A INPUT -p tcp --tcp-flags FIN,RST FIN,RST -j MY_DROP

# FIN ohne ACK
iptables -A INPUT -p tcp --tcp-flags ACK,FIN FIN -j MY_DROP

# PSH ohne ACK
iptables -A INPUT -p tcp --tcp-flags ACK,PSH PSH -j MY_DROP

# URG ohne ACK
iptables -A INPUT -p tcp --tcp-flags ACK,URG URG -j MY_DROP

# Loopback-Netzwerk-Kommunikation zulassen
iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT

# Connection-Tracking aktivieren
iptables -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

# HALF-LIFE
iptables -A INPUT -i eth0 -m state --state NEW -p tcp --dport 6000:6003 -j ACCEPT
iptables -A INPUT -i eth0 -m state --state NEW -p tcp --dport 7001:7002 -j ACCEPT
iptables -A INPUT -i eth0 -m state --state NEW -p udp --dport 27005 -j ACCEPT
iptables -A INPUT -i eth0 -m state --state NEW -p udp --dport 27010 -j ACCEPT
iptables -A INPUT -i eth0 -m state --state NEW -p udp --dport 27015:27016 -j ACCEPT

# Default-Policies mit REJECT
iptables -A INPUT -j MY_REJECT
iptables -A OUTPUT -j MY_REJECT

# Max. 500/Sekunde (5/Jiffie) senden
echo 5 > /proc/sys/net/ipv4/icmp_ratelimit

# Speicherallozierung und -timing für IP-De/-Fragmentierung
echo 262144 > /proc/sys/net/ipv4/ipfrag_high_thresh
echo 196608 > /proc/sys/net/ipv4/ipfrag_low_thresh
echo 30 > /proc/sys/net/ipv4/ipfrag_time

# TCP-FIN-Timeout zum Schutz vor DoS-Attacken setzen
echo 30 > /proc/sys/net/ipv4/tcp_fin_timeout

# Maximal 3 Antworten auf ein TCP-SYN
echo 3 > /proc/sys/net/ipv4/tcp_retries1

# TCP-Pakete maximal 15x wiederholen
echo 15 > /proc/sys/net/ipv4/tcp_retries2

;;

stop)
echo "Stoppe IP-Paketfilter"
# Tabelle flushen
iptables -F
iptables -t nat -F
iptables -t mangle -F
iptables -X
iptables -t nat -X
iptables -t mangle -X
echo "Deaktiviere IP-Routing"
echo 0 > /proc/sys/net/ipv4/ip_forward

# Default-Policies setzen
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT
;;

status)
echo "Tabelle filter"
iptables -L -vn
echo "Tabelle nat"
iptables -t nat -L -vn
echo "Tabelle mangle"
iptables -t mangle -L -vn
;;

*)
echo "Fehlerhafter Aufruf"
echo "Syntax: $0 {start|stop|status}"
exit 1
;;

esac

 

[HangLoose]

moin

ah ein *harry-script* . wenn du dieses script verwendest, brauchst du die suse firewall nicht mehr.

um das ganze beim booten starten zu lassen, kopierst du das teil nach /etc/init.d und legst noch einen link in deinen default runlevel.

ln -s /etc/init.d/firewall.sh /etc/init.d/rc5.d/S99firewall.sh

wenn 3 dein default runlevel ist, dann halt

ln -s /etc/init.d/firewall.sh /etc/init.d/rc3.d/S99firewall.sh


Gruß HL

 

[Lord Zipacna]

Ich bekomme es nicht hin.

Wie kann ich das in der Suse FW2 einbauen das er den UDP zu der IP blockt
iptables -A OUTPUT -o eth0 -d 452.452.8.245 -p udp --dport 52910 -j DROP

Bitte kann mir einer helfen

 

[HangLoose]

moin

so ganz schlau werde ich aus deiner problembeschreibung noch nicht.

du willst also ausgehende pakete dropen, die an eine bestimmte ip und einen bestimmten udp port gerichtet sind, richtig?

dann müsstest du noch sagen, woher diese pakete kommen. aus dem lan, vom firewallrechner selbst?

am besten du beschreibst dein prob nochmal so genau wie möglich. ich schaue mir das morgen nachmittag nochmal an.

Gruß HL

 

[Lord Zipacna]

Hi,

ja ich dachet es wäre genau

Du willst also ausgehende pakete dropen, die an eine bestimmte ip und einen bestimmten udp port gerichtet sind, richtig?

Ja genau das möchte ich mit der Suse FW2 gerne machen.
Es kommt vom FW Rechner selber
Es ist nur ein Rechner an der Leitung sonst nichts. Da läuft eine Anwendung und die soll nicht dort raus connecten können. Ich meine das Programm soll nicht zu der Adresse mit dem UDP port

Danke

 

[HangLoose]

Hi,

Ja genau das möchte ich mit der Suse FW2 gerne machen.

das dürfte mit der suse fw nicht gehen. allerdings ist es schon etwas her, das ich mich mit der suse fw beschäftigt habe. möglich also, das sich da schon was getan hat.

als alternative kann ich dir anbieten => lass dir auf dieser seite www.harry.homelinux.org vom iptables generator ein script erstellen(dürftest du ja eigentlich schon kennen, dein zuletzt gepostetes script stammt jedenfalls von der seite). darin musst du dann nur noch im *connection tracking block* eine regel einfügen.

# Connection-Tracking aktivieren
[b]iptables -A OUTPUT -o ppp0 -d 452.452.8.245 -p udp --dport 52910 -j DROP[/b]
 
 iptables -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
 iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

die *fette* zeile einfügen, port und ip eventuell noch anpassen. wie du das ding schon beim booten starten lässt, hab ich ja oben schon geschrieben.


Gruß HL