TV-Karte Pinnacle PCTV Stereo >> kein Sound

frafi

frafi

Mitglied
(gelöst) TV-Karte Pinnacle PCTV Stereo >> kein Sound

Hallo allerseits,

Nach der Installation von openSuSE10.2 bekomme ich keinen Sound mehr aus der TV-Karte (Pinnacle PCTV Stereo).
Dies betrifft KDETV, tvtime, XdTV .... Soundkarte funktioniert einwandfrei,
Kabelbrücke zwischen TV-Karten-Audioausgang und Soundkarten-Line-In ist gesteckt.
Line-In funktioniert mit einer anderen Audioquelle (Diskman-LineOut)...Senderscan ist erfolgreich, TV-Bild ist iO

ABER: am Ausgang der TV-Karte ist kein Audiosignal festzustellen (Aktive Lautsprecher direkt drauf gesteckt). Das Problem scheintalso bei der TV-Karte zu liegen.

Mein System ist SuSE10.2 auf AMD64, ATI Radeon 9600 mit Mesatreiber, ASUS K8N Mainboard, Onboard NForce3-Sound.
Die Karte lief unter SuSE10.0 ohne Probleme und Tricks mit der normelen Yast-Konfiguration. Ich hab allerdings beim Stöbern in Google Posts gefunden, daß es ab Kernelversion 2.6.15 wohl Sound-Probs geben sollte, nur stellten die sich etwas anders darals bei mir.


lsmod bringt das:
Code: 
Module Size Used by
xt_pkttype 18816 3
ipt_LOG 23808 8
xt_limit 20224 8
snd_pcm_oss 71680 0
snd_mixer_oss 35840 1 snd_pcm_oss
snd_seq 82976 0
snd_seq_device 26516 1 snd_seq
button 24736 0
battery 28168 0
ac 22792 0
ip6t_REJECT 22528 3
xt_tcpudp 20352 3
ipt_REJECT 22528 3
xt_state 19200 12
iptable_mangle 19840 0
iptable_nat 24964 0
ip_nat 37804 1 iptable_nat
iptable_filter 19968 1
ip6table_mangle 19456 0
ip_conntrack 78372 3 xt_state,iptable_nat,ip_nat
nfnetlink 24648 2 ip_nat,ip_conntrack
ip_tables 39400 3 iptable_mangle,iptable_nat,iptable_filter
ip6table_filter 19840 1
ip6_tables 33352 2 ip6table_mangle,ip6table_filter
x_tables 37384 10 xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp, ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tabl es
ipv6 357728 15 ip6t_REJECT
apparmor 74264 0
aamatch_pcre 31232 1 apparmor
nls_iso8859_1 22016 1
nls_cp437 23808 1
vfat 30976 1
fat 73264 1 vfat
fuse 69168 8
loop 34064 0
dm_mod 81872 0
sg 55080 0
sd_mod 39296 0
rfcomm 75688 0
hidp 50688 2
l2cap 58624 10 rfcomm,hidp
usbhid 69792 0
hci_usb 35740 0
bluetooth 90116 4 rfcomm,hidp,l2cap,hci_usb
usb_storage 105280 0
scsi_mod 173744 3 sg,sd_mod,usb_storage
usblp 32128 0
bt878 28904 0
sn9c102 110220 0
tuner 79784 0
msp3400 48544 0
bttv 222324 3 bt878
video_buf 44804 1 bttv
firmware_class 28288 1 bttv
ir_common 47236 1 bttv
compat_ioctl32 25600 1 bttv
i2c_algo_bit 26248 1 bttv
btcx_risc 22024 1 bttv
tveeprom 33680 1 bttv
videodev 42624 4 sn9c102,bttv
v4l1_compat 28548 1 videodev
v4l2_common 41472 6 sn9c102,tuner,msp3400,bttv,compat_ioctl32,videodev
shpchp 56492 0
pci_hotplug 52228 1 shpchp
ide_cd 59680 0
cdrom 54056 1 ide_cd
i2c_nforce2 24960 0
i2c_core 41472 6 tuner,msp3400,bttv,i2c_algo_bit,tveeprom,i2c_nforc e2
ohci_hcd 38404 0
ehci_hcd 51080 0
usbcore 148064 7 usbhid,hci_usb,usb_storage,usblp,sn9c102,ohci_hcd, ehci_hcd
forcedeth 60548 0
snd_intel8x0 54440 2
snd_ac97_codec 127832 1 snd_intel8x0
snd_ac97_bus 19456 1 snd_ac97_codec
snd_pcm 115464 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 44680 2 snd_seq,snd_pcm
snd 89384 12 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,s nd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 28192 1 snd
snd_page_alloc 27792 2 snd_intel8x0,snd_pcm
ext3 167696 1
mbcache 27016 1 ext3
jbd 90872 1 ext3
edd 27912 0
fan 22408 0
amd74xx 32176 0 [permanent]
thermal 33552 0
processor 53992 1 thermal
ide_disk 34304 10
ide_core 174720 4 usb_storage,ide_cd,amd74xx,ide_disk

lspci das:
Code: 
lnx010:/home/frank # lspci -v
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Unknown device 812a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
I/O ports at e800 [size=256]
I/O ports at e400 [size=128]
Memory at ff6fb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] (prog-if 00 [VGA])
Subsystem: PC Partner Limited Unknown device 7c20
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at d800 [size=256]
Memory at ff5f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff5c0000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2

01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)
Subsystem: PC Partner Limited Unknown device 7c21
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at ff5e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2

02:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
Flags: bus master, medium devsel, latency 64, IRQ 201
Memory at eeafe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section)
Flags: medium devsel, IRQ 201
Memory at eeaff000 (32-bit, prefetchable) [disabled] [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

(überflüssiges Zeugs hab ich zensiert)

Das ist von modprobe bttv:
Code: 
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 201, latency: 64, mmio: 0xeeafe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffe7ff [pre-init]
bttv0: risc main @ 3c751000
bttv0: gpio: en=00000000, out=00000000 in=00ffe7ff [init]
bttv0: BT878A ARESET
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
bttv0: tveeprom i2c attach [addr=0x50,client=tveeprom]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=7 info="PAL / stereo" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp3400 2-0040: rev1=0x0207, rev2=0x0a4b
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
msp3400 2-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and autoselect
bttv0: msp3400 i2c attach [addr=0x40,client=MSP3410G-B11]
msp3400 2-0040: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a)
msp3400 2-0040: msp34xxg daemon started
msp3400 2-0040: msp34xxg thread: sleep
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner 2-0043: chip found @ 0x86 (bt878 #0 [sw])
bttv0: tuner i2c attach [addr=0x43,client=(tuner unset)]
msp3400 2-0040: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0060: Chip ID is not zero. It is not a TEA5767
tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw])
bttv0: tuner i2c attach [addr=0x60,client=(tuner unset)]
msp3400 2-0040: v4l2_int ioctl TUNER_SET_TYPE_ADDR, dir=-w (0x4004645a)
tuner 2-0060: microtune: companycode=3dbf part=42 rev=22
tuner 2-0060: microtune MT2050 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: gpio: en=0003000f, out=0000000a in=00fce7f0 [audio: mute]
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
bttv0: video mux: input=0 mux=2
bttv0: gpio: en=0003000f, out=0000000a in=00fce7f0 [audio: mute]
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
bttv0: PLL: 28636363 => 35468950 . ok
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: msp34xxg thread: wakeup
msp3400 2-0040: thread: restart scan
msp3400 2-0040: selected PAL modus
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: started autodetect, waiting for result
msp3400 2-0040: detection still in progress
msp3400 2-0040: detection still in progress
msp3400 2-0040: detected standard: could not detect sound standard (0x0000)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: msp34xxg thread: sleep


Die Meldungen vom msp3400 von start kdetv bis ende kdetv:
Code: 
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l1 ioctl VIDIOCGAUDIO, dir=r- (0x80287610)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: scart switch: in1 => 0 (ACB=0x0000)
msp3400 2-0040: scart switch: in3 => 1 (ACB=0x0000)
msp3400 2-0040: scart switch: in1 da => 2 (ACB=0x0000)
msp3400 2-0040: set source to 2 (0x200) for output 08
msp3400 2-0040: set source to 2 (0x200) for output 0c
msp3400 2-0040: set source to 2 (0x200) for output 09
msp3400 2-0040: set source to 2 (0x200) for output 0a
msp3400 2-0040: set source to 2 (0x200) for output 41
msp3400 2-0040: set source to 2 (0x200) for output 0b
msp3400 2-0040: msp34xxg thread: wakeup
msp3400 2-0040: thread: restart scan
msp3400 2-0040: thread: no carrier scan
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: msp34xxg thread: sleep
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
bttv0: PLL can sleep, using XTAL (28636363).
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: msp34xxg thread: wakeup
msp3400 2-0040: thread: restart scan
msp3400 2-0040: thread: no carrier scan
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: msp34xxg thread: sleep
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=58880
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: scart switch: in1 => 0 (ACB=0x0000)
msp3400 2-0040: scart switch: in3 => 1 (ACB=0x0000)
msp3400 2-0040: scart switch: in1 da => 2 (ACB=0x0000)
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: msp34xxg thread: wakeup
msp3400 2-0040: thread: restart scan
msp3400 2-0040: selected M (BTSC) modus
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: started autodetect, waiting for result
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x4, stereo=0, bilingual=0 -> rxsubchans=1
bttv0: PLL: 28636363 => 35468950 .. ok
msp3400 2-0040: v4l2 ioctl VIDIOC_S_STD, dir=-w (0x40085618)
msp3400 2-0040: thread: restart scan
msp3400 2-0040: selected PAL modus
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: started autodetect, waiting for result
msp3400 2-0040: v4l2 ioctl VIDIOC_S_FREQUENCY, dir=-w (0x402c5639)
msp3400 2-0040: thread: restart scan
msp3400 2-0040: selected PAL modus
msp3400 2-0040: set source to 0 (0x320) for output 08
msp3400 2-0040: set source to 0 (0x320) for output 0c
msp3400 2-0040: set source to 0 (0x320) for output 09
msp3400 2-0040: set source to 0 (0x320) for output 0a
msp3400 2-0040: set source to 0 (0x320) for output 41
msp3400 2-0040: set source to 0 (0x320) for output 0b
msp3400 2-0040: started autodetect, waiting for result
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: detection still in progress
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: detection still in progress
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: detected standard: could not detect sound standard (0x0000)
msp3400 2-0040: mute=off scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: msp34xxg thread: sleep
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_TUNER, dir=-w (0x4054561e)
msp3400 2-0040: set source to 0 (0x20) for output 08
msp3400 2-0040: set source to 0 (0x20) for output 0c
msp3400 2-0040: set source to 0 (0x20) for output 09
msp3400 2-0040: set source to 0 (0x20) for output 0a
msp3400 2-0040: set source to 0 (0x20) for output 41
msp3400 2-0040: set source to 0 (0x20) for output 0b
msp3400 2-0040: v4l2 ioctl VIDIOC_G_TUNER, dir=rw (0xc054561d)
msp3400 2-0040: status=0x6, stereo=0, bilingual=0 -> rxsubchans=1
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2_int ioctl VIDIOC_INT_S_AUDIO_ROUTING, dir=-w (0x4008646d)
msp3400 2-0040: v4l2 ioctl VIDIOC_S_CTRL, dir=rw (0xc008561c)
msp3400 2-0040: mute=on scanning=no volume=19660
msp3400 2-0040: balance=32768 bass=32768 treble=32768 loudness=0
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)
msp3400 2-0040: v4l2 ioctl VIDIOC_G_CTRL, dir=rw (0xc008561b)

Interessant scheint mir die Meldung beim Laden von bttv / msp3400 "detected standard: could not detect sound standard (0x0000)".

Nur was ist mit Soundstandard gemeint? PAL XXX?
Wie kann ich den festlegen und vor allem mit welchem Wert?
Oder ist das nebensächlich? (Weil ja der PAL-Wert noch mal bei der Senderwahl übergeben wird)

Hat sonst jemand eine Idee, wie ich das Prob beheben könnte?
(Hatte den Thread schon bei openSuSE ähnlich drin,aber ich glaube das ist eher ein allgemeines Hardware-Kernel-Modul-...-Prob)

Bin für jede Antwort dankbar. thx



Nach Update der kompletten yast2-pakete und des kernels mit den Paketen aus dem factory-bereich und löschen + neu anlegen der tv-karte mit yast HÖR ICH WIEDER WAS!!:D
 
Zuletzt bearbeitet:
Anmelden, um zu antworten.

Ähnliche Themen

ffmpeg Framerate erhöhen.
ffmpeg Framerate erhöhen.: ffmpeg Framerate erhöhen. Hello Community, ich habe einen raspberry pi zero. Dort nutze ich die PI Cam NOIR . Mit Hilfe des v4l2loopback habe ich mehrere...

Nginx als Reverse Proxy für Nextcloud und Emby
Nginx als Reverse Proxy für Nextcloud und Emby: Hallo, wie der Titel schon sagt möchte ich Nginx als Reverse Proxy für Nextcloud und Emby verwenden. Für Nextcloud habe ich aus einer Anleitung eine neue...

Zugriff Ubuntu 16.04. auf Freigabe 18.04. LTS nicht möglich
Zugriff Ubuntu 16.04. auf Freigabe 18.04. LTS nicht möglich: Hallo, ich habe meinen Fileserver erneuern müssen, Umstellung auf 18.04. LTS! Ich habe eine Freigabe auf dem Fileserver A = FreigabeServer erstellt. Es...

[Gelöst] Suchen und ersetzen mit Hilfe mehrerer Parameter
[Gelöst] Suchen und ersetzen mit Hilfe mehrerer Parameter: Hallo zusammen, ich bin an einem Punkt angekommen, wo ich nicht mehr weiter komme und hoffe ihr könnt mir weiter helfen. Anbei ein Ausschnitt aus einer xml...

X startet nichtmehr
X startet nichtmehr: Hallo, ich habe versucht CUDA und OPENCL mit meiner Graka zum laufen zu bekommen ... nun hängt er aber schon beim Booten bei "started Update UTMP about...

Neueste Beiträge

Neueste Themen

Zurück
Oben