tuxlover
Der den Tux knuddelt
bist du sicher dass du opensuse 10.3 und nicht opensuse 11 beta1 installiert hast: das ist nämlich ein bug dort.
T
trikor
Eroberer
wenn ich das so eingebe bekomme ich die meldung
mount: you must specify the filesystem type
und ja, ich habe 10.3 runtergeladen und 10.3 zeigt er mir auch an
mount: you must specify the filesystem type
und ja, ich habe 10.3 runtergeladen und 10.3 zeigt er mir auch an
S
supersucker
Foren Gott
Wie ist denn der Stick formatiert?
Bei FAT müsste ein
oder ein
tun...
Bei FAT müsste ein
Code:
mount -t fat ......oder ein
Code:
mount -t vfat ......tun...
T
trikor
Eroberer
So langsam bin ich ratlos.
Wenn ich meinen Stick (FAT-formatiert) anschließe und fdisk -l ausführe zeigt er mir die laufwerke sdb1 bis sdb4
habe jetzt mount -t vfat /dev/sdb1 /mnt/usb probiert und bekomme die meldung
mount: special device /dev/sdb1 does not exist
bei sdb2 3 und 4 allerdings das gleiche.
bei fdisk -l zeigt er folgendes an:
Disk /dev/sdb: 132 MB, .... bytes
5 heads, 51 sectors/track, 1011 cylinders
Units = cylinders of....
This doesn´t look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks ID System
/dev/sdb1 ? ........................................ 6e Unknown
Patition 1 does not end on cylinder boundary.
/dev/sdb2 ? ......................................... ff BBT
Patition 2 does not end on cylinder boundary.
/dev/sdb3 ? ......................................... 74 Unknow
Patition 3 does not end on cylinder boundary.
/dev/sdb4 1 .......................... 0 Empty
Patition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
Wenn ich meinen Stick (FAT-formatiert) anschließe und fdisk -l ausführe zeigt er mir die laufwerke sdb1 bis sdb4
habe jetzt mount -t vfat /dev/sdb1 /mnt/usb probiert und bekomme die meldung
mount: special device /dev/sdb1 does not exist
bei sdb2 3 und 4 allerdings das gleiche.
bei fdisk -l zeigt er folgendes an:
Disk /dev/sdb: 132 MB, .... bytes
5 heads, 51 sectors/track, 1011 cylinders
Units = cylinders of....
This doesn´t look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks ID System
/dev/sdb1 ? ........................................ 6e Unknown
Patition 1 does not end on cylinder boundary.
/dev/sdb2 ? ......................................... ff BBT
Patition 2 does not end on cylinder boundary.
/dev/sdb3 ? ......................................... 74 Unknow
Patition 3 does not end on cylinder boundary.
/dev/sdb4 1 .......................... 0 Empty
Patition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
Zuletzt bearbeitet:
S
supersucker
Foren Gott
Ist der Linux-Rechner in deinem Netzwerk?
Sprich, befindest du dich in einem LAN und kannst mit einem anderen Rechner auf die Linux-Kiste via Putty + SSH zugreifen?
Weil dann kannst du die Ausgaben der Befehle hier reinkopieren und wir kommen wesentlich schneller voran.
Wahrscheinlich können wir mit der Ausgabe von fdisk -l mehr anfangen....
Sprich, befindest du dich in einem LAN und kannst mit einem anderen Rechner auf die Linux-Kiste via Putty + SSH zugreifen?
Weil dann kannst du die Ausgaben der Befehle hier reinkopieren und wir kommen wesentlich schneller voran.
Wahrscheinlich können wir mit der Ausgabe von fdisk -l mehr anfangen....
T
trikor
Eroberer
ne leider nicht. ich habe ja grade erst die installation durchgeführt. ob das wlan von der linux-kiste jetzt schon funktioniert weiß ich nicht. im windows-netzwerk wird er aber noch nicht angezeit.
S
supersucker
Foren Gott
Code:
Disk /dev/sdb: 132 MB, .... bytes
5 heads, 51 sectors/track, 1011 cylinders
Units = cylinders of....
This doesn´t look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks ID System
/dev/sdb1 ? ........................................ 6e Unknown
Patition 1 does not end on cylinder boundary.
/dev/sdb2 ? ......................................... ff BBT
Patition 2 does not end on cylinder boundary.
/dev/sdb3 ? ......................................... 74 Unknow
Patition 3 does not end on cylinder boundary.
/dev/sdb4 1 .......................... 0 Empty
Patition 4 does not end on cylinder boundary.Hmm, da stimmt aber was nicht. Der usb-stick sieht vermurkst aus.
Mach den am Besten nochmal komplett platt.
Dann sollte unter Linux nur eine einzige Partition angezeigt werden, nämlich
/dev/sdb1.
Dann klappt das mit dem Mounten auch.
Wenn nicht:
Das wir hier mal mit dem anderen Problem voran kommen:
Poste mal (bzw. tipp ab) die Ausgabe von
Code:
egrep "(EE)" /var/log/Xorg.0.logdie letzten 3 Zeilen dürften reichen.
Dann musst auch nicht soviel schreiben....
T
trikor
Eroberer
Code:
(II) Loading extension MIT-SCREEN-SAVER
(EE) PreInit returned NULL for "Mouse[1]"Ich habe den Fehler gefunden!
Es lag wohl doch an der Mouse. Ich hatte eine USB Maus per Adapter am PS2 Anschluß. Das konnte die Kiste wohl nicht leiden.
Adapter weg. Mouse in USB-Port. Und es läuft.
Vielen Dank an alle die mir geholfen haben!
:-)
Zuletzt bearbeitet:
slackfan
König
Interessanter Fehler. Was ist das für eine Maus, wenn ich fragen darf?
tuxlover
Der den Tux knuddelt
einfach mal yast anwerfen -->system --> partitionieren:
dort müsste dein datenträger dann erscheinen und du kannst ihm hier einen mountpoint zuweisen und ihn einängen:
ist dein datenträger verschlüsselt bzw. gibts nen schreibschutz oder sowas.
dort müsste dein datenträger dann erscheinen und du kannst ihm hier einen mountpoint zuweisen und ihn einängen:
ist dein datenträger verschlüsselt bzw. gibts nen schreibschutz oder sowas.
T
trikor
Eroberer
hab es mit einer Logitech Maus und mit einer Speedlink Maus probiert. Bei beiden kam der Fehler, wenn der USB/PS2-Adapter dazwischen war.
Z
zar77
hiiiiiiiiiiiiilfe
hallo gemeide,
bin ebenfalls ein linux-neuling und habe mir die 10.3 mit kde geholt.
jetzt war ich mit installieren fertig... der pc bootet und ich habe nur die komandozeilenversion vor mir. was muss ich nun machen um in den genuss von kde zu kommen?
danke für eure hilfe im voraus.
gruss zar
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
X Window System Version 7.2.0
Release Date: Sat Sep 22 22:10:58 UTC 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux suse 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC i686
Build Date: 22 September 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 13 12:56:52 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |-->Screen "Screen[fbdev]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[fbdev]"
(**) |-->Input Device "Keyboard[0]"
(**) |-->Input Device "Mouse[1]"
(**) FontPath set to:
/usr/share/fonts/truetype/,
/usr/share/fonts/uni/,
/usr/share/fonts/misc/
(==) RgbPath set to "/usr/share/X11/rgb"
(**) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail"
(**) Option "BlankTime" "0"
(**) Option "Xinerama" "off"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e6560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 103c,1a30 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 12 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 12 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 103c,2440 rev 12 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 103c,2440 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 103c,2440 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 103c,1279 rev 12 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5452 card 103c,1279 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:08:0: chip 8086,2449 card 8086,3013 rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000f (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfdfffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd7a00000 - 0xdfafffff (0x8100000) MX
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xdfb00000 - 0xdfbfffff (0x100000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Rage 128 Pro Ultra TR rev 0, Mem @ 0xd8000000/26, 0xdfdfc000/14, I/O @ 0x9800/8, BIOS @ 0xdfdc0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[2] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX(B)
[3] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX(B)
[4] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX(B)
[5] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX
[6] -1 0 0x0000d800 - 0x0000d83f (0x40) IX
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX
[9] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX
[11] -1 0 0x00009800 - 0x000098ff (0x100) IX(B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[2] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX(B)
[3] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX(B)
[4] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX(B)
[5] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX
[6] -1 0 0x0000d800 - 0x0000d83f (0x40) IX
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX
[9] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX
[11] -1 0 0x00009800 - 0x000098ff (0x100) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[6] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX(B)
[7] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX(B)
[8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX(B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX
[11] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX
[12] -1 0 0x0000d800 - 0x0000d83f (0x40) IX
[13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX
[14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX
[15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX
[17] -1 0 0x00009800 - 0x000098ff (0x100) IX(B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules//drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.3.1
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.0.2
ABI class: X.Org Video Driver, version 1.2
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
(==) FBDEV(0): RGB weight 565
(==) FBDEV(0):
Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: VESA VGA (video memory: 6144kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): mode "default" not found
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
(**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
(II) FBDEV(0): Modeline "current" 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync
(==) FBDEV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(==) FBDEV(0): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard[0]: Core Keyboard
(**) Option "Protocol" "Standard"
(**) Keyboard[0]: Protocol: Standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard[0]: XkbRules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) Keyboard[0]: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard[0]: XkbLayout: "us"
(**) Option "XkbKeycodes" "xfree86"
(**) Keyboard[0]: XkbKeycodes: "xfree86"
(**) Option "CustomKeycodes" "off"
(**) Keyboard[0]: CustomKeycodes disabled
(**) Option "Protocol" "explorerps/2"
(**) Mouse[1]: Device: "/dev/input/mice"
(**) Mouse[1]: Protocol: "explorerps/2"
(**) Option "CorePointer"
(**) Mouse[1]: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse[1]: ZAxisMapping: buttons 4 and 5
(**) Mouse[1]: Buttons: 9
(**) Mouse[1]: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD)
(II) Mouse[1]: ps2EnableDataReporting: succeeded
(EE) FBDEV(0): FBIOBLANK: Invalid argument
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
hat sich erledigt... habe suse nochmal neu installiert.
mfg
zar
hallo gemeide,
bin ebenfalls ein linux-neuling und habe mir die 10.3 mit kde geholt.
jetzt war ich mit installieren fertig... der pc bootet und ich habe nur die komandozeilenversion vor mir. was muss ich nun machen um in den genuss von kde zu kommen?
danke für eure hilfe im voraus.
gruss zar
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
X Window System Version 7.2.0
Release Date: Sat Sep 22 22:10:58 UTC 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux suse 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC i686
Build Date: 22 September 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 13 12:56:52 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |-->Screen "Screen[fbdev]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[fbdev]"
(**) |-->Input Device "Keyboard[0]"
(**) |-->Input Device "Mouse[1]"
(**) FontPath set to:
/usr/share/fonts/truetype/,
/usr/share/fonts/uni/,
/usr/share/fonts/misc/
(==) RgbPath set to "/usr/share/X11/rgb"
(**) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail"
(**) Option "BlankTime" "0"
(**) Option "Xinerama" "off"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e6560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 103c,1a30 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 12 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 12 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 103c,2440 rev 12 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 103c,2440 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 103c,2440 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 103c,1279 rev 12 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5452 card 103c,1279 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:08:0: chip 8086,2449 card 8086,3013 rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000f (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfdfffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd7a00000 - 0xdfafffff (0x8100000) MX
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xdfb00000 - 0xdfbfffff (0x100000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Rage 128 Pro Ultra TR rev 0, Mem @ 0xd8000000/26, 0xdfdfc000/14, I/O @ 0x9800/8, BIOS @ 0xdfdc0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[2] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX(B)
[3] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX(B)
[4] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX(B)
[5] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX
[6] -1 0 0x0000d800 - 0x0000d83f (0x40) IX
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX
[9] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX
[11] -1 0 0x00009800 - 0x000098ff (0x100) IX(B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[2] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX(B)
[3] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX(B)
[4] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX(B)
[5] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX
[6] -1 0 0x0000d800 - 0x0000d83f (0x40) IX
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX
[9] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX
[11] -1 0 0x00009800 - 0x000098ff (0x100) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[6] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX(B)
[7] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX(B)
[8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX(B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX
[11] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX
[12] -1 0 0x0000d800 - 0x0000d83f (0x40) IX
[13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX
[14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX
[15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX
[17] -1 0 0x00009800 - 0x000098ff (0x100) IX(B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules//drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.3.1
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.0.2
ABI class: X.Org Video Driver, version 1.2
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
(==) FBDEV(0): RGB weight 565
(==) FBDEV(0):
Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: VESA VGA (video memory: 6144kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): mode "default" not found
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
(**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
(II) FBDEV(0): Modeline "current" 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync
(==) FBDEV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(==) FBDEV(0): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard[0]: Core Keyboard
(**) Option "Protocol" "Standard"
(**) Keyboard[0]: Protocol: Standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard[0]: XkbRules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) Keyboard[0]: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard[0]: XkbLayout: "us"
(**) Option "XkbKeycodes" "xfree86"
(**) Keyboard[0]: XkbKeycodes: "xfree86"
(**) Option "CustomKeycodes" "off"
(**) Keyboard[0]: CustomKeycodes disabled
(**) Option "Protocol" "explorerps/2"
(**) Mouse[1]: Device: "/dev/input/mice"
(**) Mouse[1]: Protocol: "explorerps/2"
(**) Option "CorePointer"
(**) Mouse[1]: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse[1]: ZAxisMapping: buttons 4 and 5
(**) Mouse[1]: Buttons: 9
(**) Mouse[1]: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD)
(II) Mouse[1]: ps2EnableDataReporting: succeeded
(EE) FBDEV(0): FBIOBLANK: Invalid argument
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
.
.
.
EDIT (autom. Beitragszusammenführung) :
.
Code:
X Window System Version 7.2.0
Release Date: Sat Sep 22 22:10:58 UTC 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux suse 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC i686
Build Date: 22 September 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 13 12:56:52 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |-->Screen "Screen[fbdev]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[fbdev]"
(**) |-->Input Device "Keyboard[0]"
(**) |-->Input Device "Mouse[1]"
(**) FontPath set to:
/usr/share/fonts/truetype/,
/usr/share/fonts/uni/,
/usr/share/fonts/misc/
(==) RgbPath set to "/usr/share/X11/rgb"
(**) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5,/dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm,/dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse,/dev/inportbm,/dev/gpmdata,/dev/usbmouse,/dev/adbmouse,/dev/input/mice,/dev/input/event0"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail"
(**) Option "BlankTime" "0"
(**) Option "Xinerama" "off"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e6560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 103c,1a30 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 12 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 12 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 103c,2440 rev 12 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 103c,2440 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 103c,2440 rev 12 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 103c,1279 rev 12 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5452 card 103c,1279 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:08:0: chip 8086,2449 card 8086,3013 rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000f (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfd00000 - 0xdfdfffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd7a00000 - 0xdfafffff (0x8100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xdfb00000 - 0xdfbfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Rage 128 Pro Ultra TR rev 0, Mem @ 0xd8000000/26, 0xdfdfc000/14, I/O @ 0x9800/8, BIOS @ 0xdfdc0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX[B]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[2] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX[B](B)
[3] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX[B](B)
[4] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX[B]
[6] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[9] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x00009800 - 0x000098ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX[B]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[2] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX[B](B)
[3] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX[B](B)
[4] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX[B]
[6] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[9] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[10] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[11] -1 0 0x00009800 - 0x000098ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdfeff000 - 0xdfefffff (0x1000) MX[B]
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[6] -1 0 0xdfdc0000 - 0xdfddffff (0x20000) MX[B](B)
[7] -1 0 0xdfdfc000 - 0xdfdfffff (0x4000) MX[B](B)
[8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000ac00 - 0x0000ac3f (0x40) IX[B]
[12] -1 0 0x0000d800 - 0x0000d83f (0x40) IX[B]
[13] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[17] -1 0 0x00009800 - 0x000098ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules//drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.3.1
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.0.2
ABI class: X.Org Video Driver, version 1.2
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
(==) FBDEV(0): RGB weight 565
(==) FBDEV(0):
Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: VESA VGA (video memory: 6144kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): mode "default" not found
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
(**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
(II) FBDEV(0): Modeline "current" 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync
(==) FBDEV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(EE) FBDEV(0): FBIOBLANK: Invalid argument
(==) FBDEV(0): Backing store disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard[0]: Core Keyboard
(**) Option "Protocol" "Standard"
(**) Keyboard[0]: Protocol: Standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard[0]: XkbRules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) Keyboard[0]: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard[0]: XkbLayout: "us"
(**) Option "XkbKeycodes" "xfree86"
(**) Keyboard[0]: XkbKeycodes: "xfree86"
(**) Option "CustomKeycodes" "off"
(**) Keyboard[0]: CustomKeycodes disabled
(**) Option "Protocol" "explorerps/2"
(**) Mouse[1]: Device: "/dev/input/mice"
(**) Mouse[1]: Protocol: "explorerps/2"
(**) Option "CorePointer"
(**) Mouse[1]: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse[1]: ZAxisMapping: buttons 4 and 5
(**) Mouse[1]: Buttons: 9
(**) Mouse[1]: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD)
(II) Mouse[1]: ps2EnableDataReporting: succeeded
(EE) FBDEV(0): FBIOBLANK: Invalid argument
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing..
.
EDIT (autom. Beitragszusammenführung) :
.
hat sich erledigt... habe suse nochmal neu installiert.
mfg
zar
Zuletzt bearbeitet von einem Moderator:
Ähnliche Themen
Win 10 1803 und alte Samba Versionen: EXE von Share startet, aber keine Netzwerkverbindungen
Win 10 1803 und alte Samba Versionen: EXE von Share startet, aber keine Netzwerkverbindungen: Seit Windows 10 1803 habe ich folgenden Effekt auf mehreren PCs beobachtet:
EXE Dateien lassen sich wie gewohnt von den Shares starten (am besten zu testen...
Keine grafische Oberfläche (Debian Installation)
Keine grafische Oberfläche (Debian Installation): Hallo zusammen,
vorne weg: Ich bin Linux-Neuling und hoffe, hier im richtigen Forenbereich zu schreiben, falls nicht, bitte verschieben.
Bisher habe ich...
Samba4 AD DC
Samba4 AD DC: Hey Forum,
das ist mein erster Post ich hoffe ich bin in der Richtigen section
Ich habe mit OpenSuSe 42.1 probiert einen Samba4 AD DC Server zu erstellen...
Autostart von X mit google-chrome durch systemd
Autostart von X mit google-chrome durch systemd: Hallo zusammen,
ich versuche erfolglos einen systemd.service zu schreiben, der beim Booten einer Maschine den xserver mit google-chrome im Kiosk-Modus...
Akonadi startet nicht mehr
Akonadi startet nicht mehr: Hallo, ich habe das Problem das auf meinem OpenSuse 13.1 Akonadi plötzlich nicht mehr starten will. Ich habe schon versucht die Konfiguration zu löschen...
